674626
12
Zoom out
Zoom in
Vorherige Seite
1/108
Nächste Seite
11
GB
use an extension cable or cable drum
with a three-core cable whose earth
wire is connected.
- If the power tool is to be used outdoors,
use only extension cables that are in-
tended for outdoor use and which are
labelled as such.
- Always unroll extension cables com-
pletely.
- Extension cables must have a conductor
cross section of at least 1.5 mm
2
.
- Damaged extension cables must not be
used but rather must be replaced.
- Protect your extension cable from sharp
edged objects or from excessive heat
and moisture or wet locations.
Stay alert
Proceed cautiously, use your common
sense and do not operate the power tool
if you are tired, if you are taking medi-
cation that makes you drowsy or if you
have consumed alcohol or drugs.
Checking of damaged parts
- The power tool should be carefully
checked before use to ensure that it is
working properly and fulfilling its in-
tended purpose.
- Check that the moving parts are cor-
rectly aligned and ensure that they are
able to move freely. Check the tools for
damaged or missing parts and if neces-
sary have these replaced or repaired at
an authorised customer support centre.
If the power tool has to be mounted
then ensure that it is safely secured on
a suitable workbench. Check all other
conditions that could have an influence
on the operation of the power tool.
- If protective coverings or other parts of
the power tool are damaged then these
should be replaced or repaired in an
authorised customer support centre in-
sofar as these operating instructions do
not specify otherwise.
Careful handling of tools
Keep cutting tools sharp and clean. This
will provide you with better results and
increased safety. Replace the damaged
parts at an authorised service centre
before using the machine.
Follow the instructions for lubrication
and for replacing accessory parts.
Check the mains cable for the tool regu-
larly. If it should be damaged then have
this replaced by an approved customer
support centre.
Check the extension cable regularly and
replace it if it is damaged.
Keep grips dry, clean and free of oil and
grease.
Take care to ensure that the ventilation
slots are always clear and free of dust.
Blocked ventilation slots can lead to
overheating and can damage the motor.
Disconnect the power tool from the
mains
Ensure that the power tool is discon-
nected from the mains when not in use,
before it is serviced or lubricated, be-
fore adjustments are carried out on it,
or when accessory parts such as blades,
drill bits and cutters are replaced.
Removal of adjustment wrenches
Make it a consistent practice to always
check that there are no adjustment
wrenches remaining on the power tool
before you switch it on.
Avoidance of unintended switching on
Ensure that the switch is in the OFF posi-
tion before you connect the power tool
to the mains.
Extension cables and cable drums
- The device should be operated via a re-
sidual current circuit breaker (RCD) with
a triggering current of max. 30 mA.
- DO NOT USE cable drums or extension
cables with a two-core cable to operate
a power tool with an earth wire. Always
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Florabest FLB 3000 A1 - IAN 109790 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info