674627
13
Zoom out
Zoom in
Vorherige Seite
1/92
Nächste Seite
13
IEGB
Turning on and off
Before switching on device, make
sure it is not in contact with any ob-
jects. Ensure stable positioning.
K L M N O P Q R S T
U V W X Y Z
A B C D E F G H I J
1. Make a loop from the end of the
extension cable and attach this to
the strain relief (5).
2. Connect the machine to the pow-
er supply.
3. To turn on, push the
on/off switch (4):
- in blow mode: to the right.
- in suction mode: to the left.
4. In order to regulate the suction/
blowing power, press the volume
control (2).
5. To turn off, push the
on/off switch (4):
- in blow mode: to the left.
- in suction mode: to the right.
Working with the leaf
blower
The leaf blower may only be
used for the following pur-
poses:
- As a blower to pile up dry
leaf material or to blow mate-
rial out of places that are hard
to access (e.g. under cars)
- As a suction device to suck
up dry leaf material. The de-
vice also functions as a shred-
der in the suction function. The
dry leaves are shredded and
their volume is reduced, pre-
paring the material for later
composting if desired. The
shredding intensity depends
on the size of the leaf material
and its residual moisture.
Uses other than those de-
scribed here may damage the
machine and put the operator
at risk.
During work, ensure that the device
is not struck against hard objects,
which can cause damage. Do not
suck up any solid bodies such as
stones, branches or pieces of branch,
r cones or similar, since these can
damage the device, in particular the
shredding mechanism. Repairs of
this type are not covered by
the guarantee.
Blowing operating mode:
For safety reasons, make sure
that the protective cover (7) is
mounted on the suction ope-
ning.
You get optimal results when you use
the blower with a separation distance
to the ground of 5 -10 cm.
Begin work with the highest blowing
power, in order to rapidly pile up the
leaves lying around. Select a lower
blowing power to compact the previ-
ously piled up leaves.
Before blowing, loosen leaves adhering
to the ground with a broom or rake.
The guide rollers at the end of the tube
make it easier to work on at surfaces.
Suction operating mode:
For safety reasons, both suc-
tion tube sections and the coll-
ection bag must be correctly
mounted before you can start
the device.
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Florabest FLS 3000 B2 - IAN 275664 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info