Bedienungsanleitung Florabest FRM 1800 B2 - IAN 270737 (Seite 25 von 36) (Deutsch, Englisch)

630795

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Caution! Danger! The blade contin-

ues to run after switching off.

There is a risk of injury.

• The equipment is not to be lifted or

transported while the motor is running.

Switch off the equipment if it has to be

tilted in transit, when crossing surfaces

other than grass, and when the equip-

ment is being transported to and from

the surfaces to be mowed.

• Always keep the grass ejection hole

clean and clear. Remove cut material

only when the equipment is stopped.

• Do not leave the equipment unattended

in the workplace.

• Do not work with equipment that is

damaged, incomplete, or has been

modied without the authorisation of

the manufacturer. Do not use the equip-

ment with damaged safety devices or

screens or with missing safety equip-

ment such as deection and/or grass

collection devices.

• Do not overload the equipment. Work

only within the specied power range

and do not change the regulator set-

tings on the motor. Do not use low-pow-

ered machines for heavy work. Do not

use your equipment for purposes other

than those for which it is designed.

• Do not use the equipment near

inammable liquids or gases. Non-

observance will result in a risk of re or

explosion.

• Do not lift or carry the equipment when

the motor is running.

• Switch off the equipment and discon-

nect the plug:

- Whenever you leave the machine,

- Before cleaning the ejection hole or

removing blockages,

- When the equipment is out of use,

- Before checking, cleaning or working

on the equipment,

- If the power cable is damaged or

frayed,

- If the equipment has hit a foreign

object or if strange vibrations occur

during work. In this case, check the

equipment for damage and have it

repaired if applicable.

• Do not place feet or hands near or

under rotating parts. Do not stand in

front of the grass ejection hole during

mowing.

Maintenance and Storage:

• Ensure that all nuts, bolts and screws

are tightened rmly and the equipment

is in safe working condition.

• Do not attempt to repair the equipment

yourself unless you have been trained

to do so. Any work not specied in

these instructions is to be carried out

only by customer service centres that

we have authorised.

• Keep the equipment in a dry location

and out of reach of children.

• Handle the equipment with care. Keep

tools sharp and clean, in order to fa-

cilitate better and safer work. Follow

the maintenance instructions.

• Wear protective gloves when changing

the cutting device.

• Regularly check the grass collection

device for wear and strains. For safety

reasons, replace worn or damaged

parts. When adjusting the blades, take

particular care to avoid ngers being

trapped between the rotating blades

and xed parts of the machine.

• Check that only replacement tools au-

thorised by the manufacturer are used.

• During maintenance of the cutting

blades, be aware that they can be

brought into motion even when the

power supply is switched off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Florabest FRM 1800 B2 - IAN 270737 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info