Bedienungsanleitung Florabest FUV 2000 A1 - IAN 302766 (Seite 9 von 25) (Englisch)

679114

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

FUV 2000 A1

│

5 ■

■ Always remove the plug from the

power socket during work breaks,

when adjusting the appliance (e.g.

changing nozzles) and when it is

no longer in use.

■ Keep the nozzle at a distance from

the workpiece or the area being

processed. A build-up of hot air can

result in damage to the appliance.

■ The appliance must always be

kept clean, dry and free from oil or

grease.

■ Never use the appliance for purpos-

es other than the ones for which it

was designed.

Operation

Before Operation

Mount the device

HINWEIS

► The cable must be routed in the device as

shown in ﬁgure A. Insert the cable with a

loop into the unit. It must not exceed the

housing of the appliance. The cover of the

housing must be easy to install. Make sure

that the cable is not pinched.

♦ Place the cover on the device and screw it with

the supplied mounting screws (see Fig. A).

Mount the stand

♦ Attach the stand to the unit (see Fig. B).

Operation

♦ Push the loop of the extension cable into the

provided strain relief in the handle and

ﬁx it to the bar provided.

♦ Connect the appliance to a power socket (230

V alternating current) using an extension cable.

♦ Switch the appliance on by pressing the ON/

OFF switch

. The full operating temperature is

reached after approx. 1 minute.

♦ To kill weeds, now place the cone nozzle

onto the plant to be treated for around 5-10

seconds depending on the type of plant.

♦ For taller plants, ﬁrst only heat the upper section

of the plant brieﬂy and then place the cone noz-

zle

against the shrunken plant for approx.

5-10 seconds.

NOTE

► This appliance is particularly suitable for

removing weeds.

► Weedkilling is most eﬀective at an early

stage of vegetation growth.

► The most suitable time is during spring.

► The treatment is at its most intensive the

younger the plant is. However, the success

of the measure is not immediately visible.

The visible section of the plant can also be

burnt oﬀ with a longer exposure time/treat-

ment.

► Plants do not react immediately to the heat ra-

diation with the recommended treatment time.

The following applies as a basic principle:

young, soft-leaved plants react most sensit-

ively to treatment. They are subsequently no

longer capable of survival.

► Older plants with hard leaves such as thistles

must be treated more frequently at an interval

of between 1 and 2 weeks in order to make

them dry out.

Winter-green grasses are extremely robust

and require longer treatment.

► To begin with, overgrown areas must be

treated several times at short intervals in

order to produce long-term success. After this,

treatment at longer intervals is suﬃcient.

► Burning the plants oﬀ completely is not essen-

tial. During heating, the leaf cells dry out and

the weed will die.

► Repeated treatment of certain types of weed

may be necessary.

IB_302766_FUV2000A1_LB6-.indb 5 16.01.18 14:15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Florabest FUV 2000 A1 - IAN 302766 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Florabest FUV 2000 A1 - IAN 302766

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info