Bedienungsanleitung Florabest KH 3127 - PRC 9.6 (Seite 7 von 10) (Englisch)

558715

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

9 GB/IE/CY

Safety instructions

speciﬁc to the tool

J  Check the condition of the device,

charger

, lead

and plug

before starting to charge the device.

Do not use the tool if any of the parts are dam-

aged. Never open the tool. Repair or replace-

ment must only be carried out by the Service

Oﬃce or an electrical expert. Damaged tools,

mains cables or mains plugs pose a danger to

life as a result of electric shock.

J Maintenance and cleaning must only be carried

out when the tool is switched oﬀ and the battery

charger is disconnected from the mains power.

J Never under any circumstances charge the

integrated rechargeable battery with the bat-

tery charger if damaged.

J Only use the original battery charger to

charge the integrated battery.

J Before connecting the battery charger to the

mains power, make sure that the mains current

is 230 V

50 Hz and is equipped with a 16 A

fuse in accordance with requirements.

Caution! How to avoid injury:

Use the following safety gear when

operating the tool: Wear safety gog-

gles, worker safety boots and protec-

tive gloves.

Caution! The saw blade

runs on after the tool has

been switched off! Avoid any

contact with the rotating saw blade

J Only remove workpieces when the saw blade

has come to a complete standstill.

J Prevent the saw blade

from coming into

contact and / or colliding with stones, metal, or

similar materials. The saw blade

may other-

wise be damaged.

J Switch oﬀ the device immediately (by releasing

the On / Oﬀ switch

- If you strike any foreign body (e.g. a nail)

while making a cut!

- If the saw blade

becomes blocked (e.g.

by wood shavings / sawdust).

J Never have the charger

connected to the

device while you are sawing.

J Keep out of the area in which a cut and falling

branch could hit.

Q

Starting operation

Charging the integrated

rechargeable battery

The battery initially requires about 4 - 5 charging

cycles before it achieves its maximum capacity.

Starting the charging process

j Insert the plug

into the charging socket

j Insert the charger

into the mains socket.

The LED on the charger

indicates the device’s

battery charge state:

1. R e d : The device requires to be charged or is

being charged.

2. Green: The device is fully charged.

Ending the charging process

j Pull the charger

out of the mains socket.

j Pull the plug

out of the charging socket

Only charge the rechargeable battery when it is

empty. This prevents the “memory eﬀect” (loss of

capacity as a result of charging when only partially

discharged).

J Never switch the device on while it is being

charged.

J Do not allow any objects to cover the charger!

The heat generated by the charger while oper-

ating can lead to a build-up of heat!

General safety advice / Starting operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Florabest KH 3127 - PRC 9.6 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Florabest KH 3127 - PRC 9.6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info