736470
51
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
Manual Runner DTM3500i Treadmill - 51
4. Use
4. Set your weight by rotating the Smart Wheel. Enter by pressing the Smart Wheel.
You are now ready to start you training exercise.
Standby
After five minutes of inactivity the computer will go in standby mode automatically.
Press one of the keys to wake the computer from standby.
Pause or Stop a training session
During a training session you can pause the session by pressing the STOP key on the
control panel. To resume the training press the START key, to quit the training press
the STOP button again.
Cool Down
By pressing the COOL DOWN key during a training session the cool down program
will start directly. The speed of the belt will slowly decrease to a full stand still within
2 or 3 minutes.
LED running guide lights
The Runner DTM3500i has LED lights at both sides of the running deck. You can
set these lights into different modes and colours. Setup the running guide lights by
pressing the LED key within the main menu or navigate to this option by using the
Smart Wheel. The LED running guides can be setup in three different modes or can
be turned of completely,
Running mode The LEDs change colour according to the selected speed.
0-6 km/u - yellow, 6,1-12 km/u - green, >12 km/u - red.
Neutral mode The LED lights up in neutral white colour.
Multi colour mode Select your own preferred colour; red, blue, green, orange,
pink or purple.
OFF The ruining guide LED will be completely off.
During a training session the different LED modes can be toggled by pressing the
LED key.
MANUAL
With the manual program you can set the preferred speed and incline level during
the entire workout. Select the MANUAL program by turning the Smart Wheel in the
main menu. Press the Smart Wheel to confirm the selected program.
You are able to set time, distance or burned calories as target values. Or you can
start directly by pressing the START button.
1. Choose between time, distance or burned calories to set as target value by
rotating the Smart Wheel. Confirm by pressing the Smart Wheel.
2. Set the chosen target value by rotating the Smart Wheel. Confirm by pressing the
Smart Wheel.
51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Flow Fitness DTM3500i wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info