775829
30
Zoom out
Zoom in
Vorherige Seite
1/98
Nächste Seite
190 Series III
Users Manual
24
Pass - Fail Tests
You can use a reference waveform as a test template for the actual waveform. If at least one
sample of a waveform is outside the test template, the failed or passed scope screen will be
stored. Up to 100 screens can be stored. If the memory is full, the first screen will be deleted in
favor of the new screen to be stored. The most appropriate reference waveform for the Pass-Fail
test is a waveform envelope.
To use the Pass - Fail function with a waveform envelope:
1. Show a reference waveform on the display. See Waveform Comparisons.
2. Use the cursor and E to:
a. Highlight Pass Fail Testing menu.
b. Select Store Fail saves each scope screen with samples outside the reference
c. Select Store Pass saves each scope screen with no samples outside the reference
Each time a scope screen is saved you will hear a beep. See Replay the 100 Most Recent Scope
Screens for information on how to analyze the saved screens.
Waveform Analysis
You can use the analysis functions CURSOR, ZOOM and REPLAY to perform detailed waveform
analysis. See Replay, Zoom and Cursors for more information.
Automatic Meter Measurements (190-xx4)
The test tool offers a wide range of automatic meter measurements. You can display four large
numeric readings: READING 1...4. These readings are selectable independently, and the
measurements can be done on the input A, B, C or input D waveform. In METER mode the
waveforms are not displayed. The 10 kHz HF rejection filter is always on in the METER mode.
See Noisy Waveforms
Meter Measurement Selection
To choose a current measurement for input A, do the following:
1. Press M to show the METER key labels.
2. Open the READING menu with 1.
3. Press 1 to select the reading number to be displayed, for example READING1.
30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fluke 190-204-III wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info