764277
6
Zoom out
Zoom in
Vorherige Seite
1/22
Nächste Seite
707Ex
Users Manual
2
Battery Saver
The Calibrator automatically turns off after 30 minutes of
inactivity. To reduce this time or disable this feature:
1. With the Calibrator OFF, press D.
P.S. xx is displayed, where xx is the turn-off time in
minutes. OFF means the power saver is disabled.
2. Turn k to decrease or lto increase the turn-off time.
To disable, turn k until the display shows OFF.
3. The Calibrator resumes normal operation after
2 seconds.
Safety Information
In this manual a Warning identifies conditions and actions
that pose hazards to the user. A Caution identifies
conditions and actions that may damage the Calibrator or
equipment under test. International symbols used in this
manual are identified later in the Symbols section.
Read the entire Users Manual and the 707Ex mA
Calibrator CCD (Concept Control Drawing) before using
the Calibrator.
WWarnings and Cautions
To avoid electric shock, injury, or damage to the
Calibrator:
Use the Calibrator only as described in this
Users Manual and the Fluke 707Ex mA
Calibrator CCD (Concept Control Drawing) or
the protection provided by the Calibrator may
be impaired.
Inspect the Calibrator before use. Do not use it
if it appears damaged.
Check the test leads for continuity, damaged
insulation, or exposed metal. Replace damaged
test leads.
Never apply more than 28 V between the input
terminals, or between any terminal and earth
ground.
Applying more than 28 volts to the input
terminals invalidates the Calibrator’s Ex
Approval and may result in permanent damage
to the unit so it can no longer be used.
Use the proper terminals, mode, and range for
your measuring or sourcing application.
To prevent damage to the unit under test, put
the Calibrator in the correct mode before
connecting the test leads.
When making connections, connect the COM
test probe before the live test probe. When
disconnecting, disconnect the live probe before
the COM probe.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fluke 707Ex wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Fluke 707Ex

Fluke 707Ex Bedienungsanleitung - Deutsch - 22 seiten

Fluke 707Ex Bedienungsanleitung - Holländisch - 22 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info