764336
23
Zoom out
Zoom in
Vorherige Seite
1/130
Nächste Seite
Documenting Process Calibrator
Get Started
11
Get Started
Warning
To prevent possible electrical shock, fire, or
personal injury:
Remove circuit power before you connect
the Product in the circuit when you
measure current. Connect the Product in
series with the circuit.
Do not touch exposed metal on banana
plugs, they can have voltages that could
cause death.
Disconnect power and discharge all high-
voltage capacitors before you measure
resistance or continuity.
A brief getting started exercise follows:
1. After you unpack the Product, charge the battery for 8
hours (if the battery is outside of the Product, charge for
5 hours). For more information, see “The Battery”. The
Battery will only charge if the Product is off.
2. Connect voltage output to the voltage input. To do this
connect the left pair of jacks (V Ω RTD SOURCE) to
the right pair of jacks (V MEASURE). See Figure 2.
3. Push o to turn on the Product. If necessary, adjust the
display brightness. See “Display Brightness”. The
Product powers up in the dc voltage measurement
function, and is reading on the V MEASURE pair of
input jacks.
4. Push to show the SOURCE screen. The Product
still measures dc voltage and the active measurement
is at the top of the display.
5. Push to select dc voltage sourcing. Push 5 on the
keypad and to begin sourcing 5.0000 V dc.
6. Push to go to the split-screen, simultaneous
MEASURE/SOURCE mode. The Product
simultaneously sources dc volts and measures dc volts.
The measurement readings are shown on the top
display, and the active source value on the bottom
display as shown in Figure 3.
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fluke 754 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Fluke 754

Fluke 754 Bedienungsanleitung - Deutsch - 130 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info