2
Use this Product indoors only.
Use the Product only as specified, or the protection supplied by the
Product can be compromised.
Do not use and disable the Product if it is damaged.
Do not use the Product if it operates incorrectly.
Batteries contain hazardous chemicals that can cause burns or
explode. If exposure to chemicals occurs, clean with water and get
medical aid.
Remove the batteries if the Product is not used for an extended
period of time, or if stored in temperatures above 50 °C. If the
batteries are not removed, battery leakage can damage the
Product.
The battery door must be closed and locked before you operate
the Product.
Repair the Product before use if the battery leaks.
Recharge the batteries when the low battery indicator shows to
prevent incorrect measurements.
Do not disassemble or crush battery cells and battery packs.
Do not put battery cells and battery packs near heat or fire. Do not
put in sunlight.
Have an approved technician repair the Product.
For Products with rechargeable batteries, use only AC adapters
approved by Fluke Networks for use with the Product to supply
power to the Product and charge the battery.
Caution
To prevent damage to the Product or cables under test and to
prevent data loss, read all safety information given in all
documentation supplied with the Product.
Connectors, Keys, and LEDs
See Figure 1.
LCD display with touchscreen.
Blank module included with the FI-7000 kit. Keep the module installed to give
protection to the module connectors.
Micro-AB USB port: This USB port lets you connect the tester to a PC so you can
upload test results to the PC and install software updates in the tester.
Type A USB port: This USB host port lets you save test results on a USB flash
drive
, connect the FI-1000 video probe to the tester, or connect a Wi-Fi adapter
for access to Fluke Networks cloud services.
