Bedienungsanleitung Flyer Crossocver - Fit 2022 (Seite 303 von 412) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

803528

303

Zoom out

Zoom in

Vorherige Seite

1/412

Nächste Seite

Do not forget to take a high-quality bike

lock with you on the ride so you can park

your FLYER and lock it to an immovable

object. Separately lock the components

that are fastened with quick-release fas-

teners(e.g. the front wheel) as required.

This will prevent theft of these add-on

parts.

12. Afterafall

Have the vehicle and all components checked

for changes, damage, rm attachment and cor-

rect function by a FLYER specialist retailer. This

may, in particular, include dents and cracks in the

frame and fork, bent components and parts such

as the handlebars or a shifted or turned seat.

Inspection by a FLYER specialist retailer must

cover the following main points:

• Carefully check the frame and fork. Deforma-

tions can usually be detected when looking at

surfacesfromdi󰀨erentangles.

• Are the seat, seat post, stem and handlebars

still in their correct positions? If this is not the

case, do NOT move the components back

from their changed position before loosening

the relevant screw connection. It is essential

to adhere to the prescribed fastening torque.

Values and information are provided in the se-

parate “Technical Data” operating instructions

document.

• Check whether both wheels are correctly and

rmlyattachedtotheframeandfork,thatboth

thefrontandrearwheelsrotatefreely.Experts

can see from the distance between the frame

or fork and the wheel whether the wheel turns

without snagging.

• Check that both brakes are operating fully.

• Do not set o󰀨 again without having checked

that the chain is sitting securely on both the

front chain wheel and rear sprockets. It must

beengaged fullywith thecogs. Ifyou seto󰀨

andthechainjumpso󰀨acogyoumayfall,at

the risk of very severe injury.

• Check whether the display of the FLYER

E-Bike shows a fault message or a warning.

Do not drive your FLYER when a warning is

displayed. Contact your FLYER specialist re-

tailer immediately.

• Check that the display and the battery are un-

damaged. Do not ride your FLYER if there are

any noticeable changes (cracks, scratches,

etc.).Haveallpartsandfunctionscheckedrst

by your FLYER specialist retailer.

There is a risk that humidity or water

may penetrate the motor if the housing

of your battery is cracked. This may lead

to short circuits or electrical shocks. Im-

mediately stop using the battery in this

case and contact your FLYER specialist

retailer. Do not charge the battery.

If you notice any changes to your E-Bike, DO

NOT continue cycling. Do not retighten any loose

partswithoutrstcheckingthemandalwaysuse

a torque wrench. Take the FLYER to your FLYER

specialist retailer, describe the fall to them and

have the bicycle checked out.

13. Adjusting the

bike to the rider

Installing pedals

Always have your pedals installed or changed by

your FLYER specialist retailer, and feel free to ask

for advice on correct handling.

Pedals must be installed with a suitable spanner.

Please note that the two pedals are screwed on

indi󰀨erentdirectionsandmustbefastenedwith

high torque (See the separate “Technical Data”

operating instructions document.). Apply assem-

bly grease to both threads.

Pleasetakenotethattherightpedal isdi󰀨erent

from the left. You can recognise which pedal be-

longs on which side from the screws which turn in

opposite directions. Usually, an “R” is embossed

on the right pedal and an “L” on the left. Screw the

right pedal clockwise and the left pedal anti-clock-

wise into the cranks.

The pedals must be fastened with a suit-

able spanner. Observe the correct fas-

tening torque when attaching the pedals.

Ensurethatthepedalsarettedstraight

(See the separate “Technical Data” op-

erating instructions document). If they

arettedatanangle,thereisadanger

that they will break and cause a fall.

(See the separate “Technical Data” op-

erating instructions document.)

For safety reasons, we strongly advise

not using pedals with clips or straps.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Flyer Crossocver - Fit 2022 Seite 303

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info