Bedienungsanleitung Flyer GOROC X 2022 (Seite 294 von 389) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

803523

294

Zoom out

Zoom in

Vorherige Seite

1/389

Nächste Seite

There is a risk that humidity or water

may penetrate the motor if the housing

of your battery is cracked. This may lead

to short circuits or electrical shocks. Im-

mediately stop using the battery in this

case and contact your FLYER specialist

retailer. Do not charge the battery.

If you notice any changes to your E-Bike, DO

NOT continue cycling. Do not retighten any loose

partswithoutrstcheckingthemandalwaysuse

a torque wrench. Take the FLYER to your FLYER

specialist retailer, describe the fall to them and

have the bicycle checked out.

13. Adjustingthe

biketotherider

Installingpedals

Always have your pedals installed or changed by

your FLYER specialist retailer, and feel free to ask

for advice on correct handling.

Pedals must be installed with a suitable spanner.

Please note that the two pedals are screwed on

indi󰀨erentdirectionsandmustbefastenedwith

high torque (See the separate “Technical Data”

operating instructions document.). Apply assem-

bly grease to both threads.

Pleasetake notethattherightpedal isdi󰀨erent

from the left. You can recognise which pedal be-

longs on which side from the screws which turn in

opposite directions. Usually, an “R” is embossed

on the right pedal and an “L” on the left. Screw the

right pedal clockwise and the left pedal anti-clock-

wise into the cranks.

The pedals must be fastened with a suit-

able spanner. Observe the correct fas-

tening torque when attaching the pedals.

Ensurethatthepedalsarettedstraight

(See the separate “Technical Data” op-

erating instructions document). If they

arettedatanangle,thereisadanger

that they will break and cause a fall.

(See the separate “Technical Data” op-

erating instructions document.)

For safety reasons, we strongly advise

not using pedals with clips or straps.

Ensure that you have read the manufac-

turer‘s instructions before using clipless

or step-in pedals. Practise clipping your

shoes in and out of the pedals’ locking

systembeforeyour rstrideina quiet,

safe place. Clipless pedals which do not

properly release are a safety hazard.

The release force of step-in pedals can

beadjusted.Pleasetestthisonyourrst

ride with a setting that releases easily.

Regularly clean the step-in pedals and

service them with a suitable lubricant.

The pedal surfaces may be very rough.

This improves the grip on the pedal.

Leather soles may be damaged by the

rough surface.

13.1 Operatingquick-release

 fastenersandaxles

The wheels, seat post, seat, stem and handlebars

may be attached with quick-release fasteners,

quick-release axles or screw connections.

Only allow your FLYER specialist retailer

to perform work on quick-release fasten-

ers and quick-release axles. These are

components which are crucial for your

safety, so incorrect work and tools in this

area of the bicycle could lead to serious

falls.

Quick-releasefasteners

Quick-release fasteners are clamping brackets

which attach components like a screw, however

their clamping force stems from tightening the le-

ver without tools. The clamping force is activated

by opening and closing the lever.

The clamping force is adjusted by turning the

counter nut when the lever is open.

1. In order to open a quick-release fastener, to

adjust the seat post for example, open the

quick-release lever.

2. Now you can move and adjust the seat post.

The clip on the seat tube opening must not be

closed when the seat post is removed from a

FLYER with a carbon frame.

3. The quick-release fastener must be securely

closed before using the FLYER. Completely fold

down the quick-release lever for that purpose.

Fully engage any possible safety devices.

The quick-release fastener is only se-

curely closed when you need the power

of the ball of your hand to close the

clamping lever.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Flyer GOROC X 2022 Seite 294

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info