206
19. Inspection plan
After the rst 200 ridden kilometres
or after 4 months:
FLYER specialist retailer
• Check the rm attachment of all screws, nuts
and quick release fasteners
• Check the wheels and centre them as required
• Check the tyres
• Check the fastening torque on all parts
• Adjust the headset
• Check the brake and shifter cables
• Check the gear system and adjust if necessary
• Check the brakes, adjust if necessary
• Check the suspension elements, adjust if nec
-
essary
• Sufcient lubrication of all components
FLYER driver
During your e-bike's rst
inspection by the FLYER specialist retailer, ask
them to explain the correct processes for cleaning
and oiling the chain after rain and checking com
-
ponents for function or damage.
Before each ride – FLYER driver
• Check the correct position of the bell
• Check the function of the brakes
• Check the function of the gear system
• Check the function and correct setting of sus
-
pension elements
• Are all quick release fasteners, quick release
axles, screws and nuts completely closed and
fastened?
• Check that the tyre pressure is correct
• Check the wheels for true running and dam
-
age as well as safe attachment and correct
fastening
• Check that the handlebars, stem, seat post
and seat are safely attached and correctly po
-
sitioned
• Check the battery's charge status
• Check that the battery is correctly and securely
attached.
After each ride – FLYER driver
• Cleaning the FLYER e-bike
• Visual inspection of the frame and of
components for cracks and damage
• Check the tyres for damage, wear, brittleness,
alien objects and sufcient prole depth
• Check the rims for wear and true running
• Check the tension of the spokes
• Clean the chain and sprockets as required and
lubricate them with a suitable chain oil approved
by the manufacturer
• If necessary, clean the brake discs with a suitable
brake cleaner approved by the manufacturer
• Clean all bearings as required and lubricate
them with suitable lubricant approved by the
manufacturer
• Clean suspension elements as required and lu
-
bricate them with original lubricant approved by
the suspension manufacturer
• Clean all moving parts for which lubrication is
intended (especially quick release fasteners,
quick release axles and the joints) as required
and lubricate them with a suitable lubricant ap
-
proved by the manufacturer
Allow your FLYER specialist retailer to instruct you.
After riding in rain, snow or wet conditions
(in addition to the points under "After each ride")
FLYER driver
• Clean the chain and lubricate it with a suitable
lubricant approved by the manufacturer
• Clean the brake
• Clean the gear system
• Check the sufcient lubrication of all compo
-
nents
Allow your FLYER specialist retailer to instruct you.
Monthly – FLYER driver
Check that all screws, nuts, quick release axles
and quick release fasteners are rmly attached
Every year or after every 1000 km, whichever
occurs rst
FLYER specialist retailer
• Lubrication of all moving parts for which lubrica
-
tion is intended (excluding brake surfaces)
• Visual inspection of the frame and of
components for cracks and damage
• Mend paint damage
• Replace parts with rust spots
• Treat all bare metal parts (excluding brake sur
-
faces) against corrosion (rust)
• Change defective or damaged parts
• Check the wheels and centre them as required
• Check the tension of the spokes
• Check and clean the chain/sprocket/cogset
• Lubricate the chain with a suitable lubricant
• Check the rim for wear
• Check the brake pads for wear
• Check that all screws, nuts, quick release axles
and quick release fasteners are rmly attached
• Check the brake system and quick release ax
-
les and adjust it or replace parts if necessary
• Check the gear system and adjust or replace
parts of it if necessary
• Check the hubs
• Check the headset
• Check the pedals
1. Only use cleaning agents and lubri
-
cants that are recommended or ap-
