Bedienungsanleitung Flyer Urban - Bosch 2016 (Seite 148 von 249) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Norwegisch)

780045

148

Zoom out

Zoom in

Vorherige Seite

1/249

Nächste Seite

146

• Place one edge of the rim into the tyre.

• Push one side of the tyre completely into the rim.

• Insert the valve through the valve hole in the

rim and put the inner tube into the tyre.

• Pull the second side of the tyre into the rim with

the balls of your hands.

• Ensure that the inner tube is correctly positioned.

• Pump the inner tube up somewhat.

• Check that the tyre is properly in place and

runs true using the control ring on the side of

the tyre. Adjust the positioning of the tyre with

your hand if it does not quite run true.

• Pump the inner tube up to the recommended

tyre pressure.

Please take note of the running direction

of the tyre when installing it.

6. Reattaching the wheel

Reattach the wheel securely back in the frame or

fork with the corresponding quick release, bolted

connection or full oating axle mechanism.

If your FLYER has disc brakes, please

ensure that the brake discs are correctly

secured between the brake pads!

Read the gear manufacturer‘s instructions to cor-

rectly and safely assemble and set up derailleur

gear systems, gear hubs and combined hub and

derailleur gear systems.

Tighten all screws to the recommended

torque. Failing to do so could cause the

screws to tear and components to come

apart.

• Connect the brake line, attach it or close the

brake quick release.

• Check if the brake pads are aligned with the

brake surfaces.

• Securely attach the brake arm.

• Test the brakes.

13. Bicycle gears

The gear shifters regulate the necessary cycling

power and speed. While riding in lower gears, it

becomes easier to ride on inclined planes and it

reduces physical exertion when pedalling. While

riding in higher gears, more physical exertion is

needed to pedal, allowing you to reach higher

speeds with lower pedalling cadence.

Ask for detailed instructions regarding

the operation and the special features of

the e-bike's gear system from your

FLYER specialist retailer, even if you are

an experienced cyclist. Practise on an

even and safe terrain.

If you have any questions about assembling,

maintaining, setting up or operating the gears,

please contact your FLYER specialist retailer.

Read the operating instructions on the website of

the respective manufacturer.

Despite a perfectly set up chain gear

system, a bike chain crossing at an an-

gle can lead to noises during riding.

These noises are normal and do not

cause any damage to the gear compo-

nents.

Do not pedal backwards while changing

gears, as this may damage the gear sys-

tem.

Using faulty, incorrectly set-up or worn

gear components is dangerous and can

lead to falls. If you are concerned, have

components checked and readjusted as

required by a FLYER specialist retailer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Flyer Urban - Bosch 2016 Seite 148

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info