Bedienungsanleitung Flyer Urban - Bosch 2016 (Seite 156 von 249) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Norwegisch)

780045

156

Zoom out

Zoom in

Vorherige Seite

1/249

Nächste Seite

154

Never drive without a battery or with

your system switched off, as the func-

tions of the operating unit and the light-

ing functions are not available in this

case.

Always remove the battery before clean-

ing, maintaining or repairing your e-bike.

Ensure that you do not touch and thus

possibly connect contacts when clean-

ing or maintaining the battery. You risk

being hurt and the battery may suffer

damage if the contacts are live.

Do not use a high pressure water stream

or a high pressure cleaner on your bike.

The cleaning liquid may enter sealed

bearings due to high pressure, dilute

the lubricant and increase friction. As a

result, rust is formed which destroys the

bearings. Cleaning with a high-pressure

cleaner may damage the electrical sys-

tem.

You should avoid doing the following

when cleaning your FLYER e-bike:

• Acids

• Fats

• Oil

• Brake cleaner (except use on brake

discs)

• Solvent-based liquids.

These damage the surfaces and contrib-

ute to wear on the FLYER.

After use, ensure that you dispose of the

lubricant, cleaning and care products in an

environmentally friendly way. These sub-

stances do not belong in domestic waste,

in the drain or in natural environments.

Smooth operation and durability of your

FLYER e-bike depend on appropriate

maintenance and care for your FLYER.

• Regularly clean your FLYER with

warm water, small amounts of clean-

ing agent and a sponge.

• While cleaning the FLYER, always

check your e-bike for cracks, notches

or material deformities.

• Damaged parts must be changed with

original spare parts. Please only ride

your FLYER again after this check

has been carried out.

• Have possible paint damage removed

by your FLYER specialist retailer.

Further important information concerning care for

your FLYER e-bike is provided on the website of

your respective component manufacturer.

21. Wearing parts

Your FLYER is a technical product and therefore

requires regular inspection.

Many parts of your FLYER are subject to very

rapid wear, depending on their function and the

extent of usage.

This includes:

• Tyres

• Rims in connection with rim brakes

• Brake pads

• Brake discs

• Bicycle chain or drive belt

• Chain wheels, sprockets, jockey wheels

• Lighting system

• Handlebar grips

• Lubricants

• Gear and brake cables

• Bearings

• Suspension elements

Have your FLYER regularly inspected in

a FLYER specialised workshop and

have wearing parts changed as re-

quired. Regular visual inspection for

cracks, scratches and damage to com-

ponents is the responsibility of the driver.

The bicycle is subject to wear and high

stress as are all other mechanical com-

ponents. Depending on the degree of

stress imposed on them, different mate-

rials and parts may react differently in

terms of wear and fatigue. A part may

suddenly fail and cause injuries to the

driver when its designed service life is

exceeded. Any kind of cracks, scratches

or colour changes in high-stress areas

are an indicator that the service life of

the component has been exceeded and

that it should be replaced.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Flyer Urban - Bosch 2016 Seite 156

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info