Bedienungsanleitung Flymo Contour Cordless 24 V (Seite 9 von 136) (Alle Sprachen)

631006

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

ENGLISH – 2

3. Only use the replacement cutting line specified for this

product.

4. Only use replacement parts and accessories recom-

mended by Husqvarna UK Ltd.

5. After any maintenance in dealing with the cutting line,

always return the product to its normal operating posi-

tion before switching on.

6. To avoid the risk of injury keep fingers and hands clear

of the line cutter on the leading edge of the guard.

7. Clean unit with a dry cloth. Never use metal objects to

clean the unit.

8. Inspect and maintain the trimmer regularly.

Any repairs must be carried out by an authorised

repairer.

9. Store the product in a cool, dry place and out of reach

of children. Do not store the product outdoors.

10. Allow the product to cool for at least 30 minutes before

storing.

Battery Pack Care

1. If over a period of time the Battery Pack quickly runs

down after a full 6 hour charging period, a

replacement Battery Pack is needed.

2. There will be some charge present in the Battery Pack

but to ensure maximum running time, charge your

Battery Pack for 6 hours before first use.

3. To prevent permanent Battery Pack damage, never

store in a discharged condition.

4. Contact your local approved service centre/dealer/

distributor for a replacement Battery Pack and for safe

disposal of your old Battery Pack.

5. Battery

24 Volt 1.6 AmpHour “High Power”

Sealed for Life No maintenance required

• IMPORTANT

DISPOSE OF YOUR OLD BATTERY PACK SAFELY

DO NOT CUT OPEN, BURN OR INCINERATE.

Winter Storage

1. Fully charge for 6 hours before winter storage.

2. Re-charge the Battery Pack every 3 to 4 months for

a full 6 hour charging period to top up the battery

charge during winter storage.

3. Avoid extended storage without re-charge.

4. Store in a cool dry place.

For further information on Battery Pack replacement

contact your local dealer.

Battery Pack

Assembly of Switch Handle to Tube (A1)

• Ensure that the internal cable is not twisted.

1. Insert the tube into the switch handle.

2. Push until it clicks into position.

• ENSURE THAT THE TUBE IS FULLY LOCATED BY

ATTEMPTING TO REMOVE IT.

Assembly of Trimmer Head to Tube (A2)

• Ensure that the internal cable is not twisted.

1. Insert the tube into the trimmer head.

2. Push until it clicks into position.

• ENSURE THAT THE TUBE IS FULLY LOCATED BY

ATTEMPTING TO REMOVE IT.

Wheel Assembly (B1) & (B2)

1. Attach the wheel to the trimmer making sure that it is

located into the BOTTOM groove on the trimmer head

as illustrated in Fig B1.

2. Clip the wheel together on each side making sure it is

secure (B2).

3. The wheel should turn freely.

Plant Guard Assembly (B3) & (B4)

1. Open the plant guard as illustrated in Fig B3 and place

into the TOP groove on the trimmer head. Rotate the

plant guard clockwise until it CLICKS into its parked

position (B4).

Safety Guard Assembly (C1) & (C2)

1. Locate the safety guard over the cutting head. Ensure

the nylon line is fed through the hole in the safety guard

as illustrated in Fig C1.

2. Push into location and turn safety guard in the direction

illustrated in Fig C2, until a click is heard and the safety

guard is securely locked in position.

• ENSURE THE SAFETY GUARD IS SECURELY IN

PLACE BY ATTEMPTING TO TWIST GUARD.

Steady Handle Assembly (D)

1. Pull the steady handle release lever towards the handle

grip.

2. Depress the two buttons on the side of the steady

handle.

3. Locate the buttons into the main handle and release the

lever.

4. Adjust the steady handle to the most comfortable

operating position by pulling the release lever and

moving the handle.

Height Adjustment (E)

1. Turn height adjuster (E1) in the direction indicated to

un-lock (E2).

2. Adjust the length of the tube to the most comfortable

operating position.

3. Turn height adjuster in the opposite direction to

lock (E3).

• ENSURE THAT THE TUBE IS FULLY SECURED.

Assembly Instructions

Initial Charging Procedure

1. Use the charger indoors only.

2. Ensure the charger is not exposed to moisture. Keep

the charger and the Battery Pack dry at all times. Keep

the charger well ventilated during charging.

3. Attach the charger connector (F1) to the Battery Pack.

4. Plug the charger (F2) into a suitable household electrical

wall socket and switch on.

5. The red indicator lamp (F3) glows continuously during

charging.

6. Full charge will be achieved in 3 hours after which the

indicator lamp on the charger (F3) will turn to green.

During charging the charger becomes warm. This is

normal and means the charger is operating correctly.

Re-Charging the Battery Pack

1. Re-charge the Battery Pack as soon as the cutting

power of your trimmer begins to die and slow down.

2. Avoid running the Battery Pack into “deep” discharge,

i.e. avoid flattening the Battery Pack completely.

3. Follow the procedure outlined in the Initial Charging

Procedure.

4. Charging the Battery Pack according to these instruc-

tions should ensure maximum battery life.

Battery Pack Assembly (G)

1. Attach the Battery Pack as illustrated in Fig G, ensuring

that it clicks into position and is located firmly.

2. To remove, press the two buttons (G1) on either side of

the Battery Pack and slide off.

Charging the Battery Pack

5012693-01 Contour Cordless 24V Euro.indb 2 16.10.15 11:27

Flymo Contour Cordless 24 V Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info