Bedienungsanleitung Focus Fazua 2018 (Seite 7 von 39) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

780049

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

Using your eBike

Switching eBike System on/off

The system can be operated by a FAZUA approved Remote (16). Once the

Drivepack (1) is mounted on the eBike, the system can be switched on by

pressing any of the Remote buttons (17, 18, 19).

For switching off the system:

1. Press and hold the middle button of the Remote (18) for 2 s.

2. Unmount the Drivepack (1) from the eBike (Action D).

3. Switch off the Battery Pack (8) by pressing the on/off button (9) for 2 s.

Setting the Support Level

You can set on the Remote (16) to what extent should the eBike system

support you when pedaling. The support level can be set at any time, even

while riding. To switch the support level, you must press the up/down buttons

(17, 19) on the Remote (16).

The following support levels are available:

Support Level Color Max. Support Factor Max. Power

No Support White 0% 0 W

Breeze Green 75% 125 W

River Blue 150% 250 W

Rocket Pink 240% 400 W

State-of-charge and support level bar

The state of charge/support level bar (21) shows 2 parameters:

• State-of-charge of your Battery Pack (8): indicated by the number of

LEDs that are lit. When fully charge at the Battery Pack (8), all 10 LEDs

are lit. However, if Battery Pack (8) is empty, then no LEDs will light up.

• Selected support level of your eBike: indicated by the shining color of

the LEDs (See previous section Setting the Support Level).

Switching the Walk-assistance mode on/off

To activate the Walk-assistance mode, set your system to “No Support“ mode

on the Remote (16) (See section Setting the Support Level). Then, press and

hold the down button (19) on the Remote (16). After 2 s the Walk-assistance

mode switches on.

Charging the Battery Pack

The Battery Pack (8) can be recharged at any time on its own, within a

Drivepack (1), or within your eBike. Interrupting the charging process at any

moment is also possible.

Connect the power plug (26) of the power cord (25) to the

power socket (24) of the Charger (23). Then connect the mains plug

(country-specic) to the mains supply. Finally, connect the charge

connector (27) into the charge plug (11) of your Battery Pack (8).

Once the Battery Pack (8) is fully charged, the LEDs at the charge-control

indicator (10) turn off. The state-of-charge can now be checked by briey

pressing the on/off button (9) on your Battery Pack (8).

Warning! Read carefully and observe the Battery Pack (8)

instructions.

Warning! Pay attention to your Battery Pack (8) before each use

and before charging. Make sure terminals and surfaces are clean.

Warning! Before using or charging your Battery Pack (8),

always look for signs of damage like cracks or burns. Never

use or charge a damaged Battery Pack (8). Please contact

your FAZUA Service Partner or visit the FAZUA Service Platform

(www.fazua.com/service).

10 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Focus Fazua 2018 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info