Bedienungsanleitung Focus Impulse Speed 2.0 - 2014 (Seite 15 von 30) (Englisch)

780055

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Original User Manual | Pedelec Impulse Speed 2.0 15

b) Seat tube battery: Press the push button briey. The

LEDs light up and display the current battery charge state.

SEAT TUBE BATTERY DISPLAY BATTERY CHARGE

STATE

••••• 5 LEDs light up 100-%

•••• 4 LEDs light up -%

••• 3 LEDs light up -%

•• 2 LEDs light up -%

•1 LED lights up -%

¡1 LED ashes -%

5 LEDs ash quickly % or overloaded *

1st LED ashes quickly Charging fault **

* All 5 LEDs ash quickly: The battery is a) empty and is

being switched o, or is b) overloaded.

a) If the battery is overloaded, it will switch back on aer

a short idle period and can then be used normally.

b) If the battery is empty, it will work again briey fol-

lowing a short period of rejuvenation and will then

switch back o. It must now be charged.

** The 1st LED ashes quickly to indicate a charging fault.

Please take the battery to your specialist cycle shop.

5.2.2 Checking the capacity

a) Down tube battery: If you hold down the battery button

for roughly ve seconds, the LEDs show the current bat-

tery capacity.

DOWN TUBE BATTERY DISPLAY CAPACITY

•••• 4 LEDs light up approx. –%

••• 3 LEDs light up approx. –%

•• 2 LEDs light up approx. –%

•1 LED lights up approx. –%

¡1 LED ashes approx. –%

b) Seat tube battery: If you press the push button for ve

seconds, the LEDs show the current capacity of the bat-

tery.

SEAT TUBE BATTERY DISPLAY CAPACITY

••••• 5 LEDs light up -%

•••• 4 LEDs light up -%

••• 3 LEDs light up -%

•• 2 LEDs light up -%

•1 LED lights up -%

¡1 LED ashes  %

The range of the battery is less in winter due to

the lower temperatures. Only move the battery

(om the warm room where you store it) and t it

on your Pedelec just before you set o. This will

help to prevent the eect of the low temperature

on the range of the battery. ➠ Chapter 5.4 “War-

ranty and service life”.

5.3 Battery management

The battery management monitors the temperature of

your battery and warns you of incorrect use.

If an external short-circuit has been caused at the

contacts or the charging socket, please consult

your specialist cycle shop.

Never leave the battery unattended during charg-

ing. Disconnect the charger aer use.

5.3.1 Sleep mode

The battery management switches the battery to sleep

mode to prevent a so-called deep discharge. At the latest,

the battery management activates the sleep mode aer

ten days without use. The system exits sleep mode when

you connect the battery to the charger or press the battery

button or push button on the battery. This “wakes up” the

battery.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Focus Impulse Speed 2.0 - 2014 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Focus Impulse Speed 2.0 - 2014

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info