Bedienungsanleitung Focusrite Saffire PRO 14 (Seite 6 von 45) (Englisch)

624388

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

Getting Started

The Safﬁre PRO 14 has a single 6 pin FireWire port on the back. This FireWire connection will work with any of the current FireWire

standards and connectors; FireWire 400 (6 pin or 4 pin connection); and FireWire 800.

BEFORE YOU CONNECT THE Safﬁre PRO 14 TO YOUR COMPUTER, PLEASE RUN THE INSTALLER. This will ensure that the correct

drivers are used, thus preventing any unexpected behaviour.

The Safﬁre PRO 14 ships with a 6 pin FireWire cable. However on Windows laptops, the FireWire connection may be 4 pin FireWire.

In this case you will need to purchase a 6 pin to 4 pin cable.

You may have a FireWire 800 connector on your computer. In this case you will need to purchase a 6 pin FireWire 400 to 800 cable.

The Safﬁre PRO 14 can be powered via the FireWire connection when using 6 pin FireWire 400 or FireWire 800. When connected to a

4 pin FireWire you will need to use the supplied PSU.

Note:

FireWire considerations - Most computers will generally be equipped with 1 FireWire bus. You may have multiple FireWire ports

(connectors) on your computer, but these are all connected to one physical chip which controls the bus.

The FireWire bus is limited in the amount of data bandwidth it can handle. Each additional FireWire device connected to the FireWire

bus demands additional bandwidth resources, thus increasing the chances of exceeding the total available bandwidth. Consequently,

it is recommended that Safﬁre PRO 14 run on its own FireWire bus for best performance.

The Safﬁre PRO 14 should be able to work alongside other devices connected to the same FireWire bus. However, problems may

arise depending on which FireWire devices are connected. For example, a FireWire disk used for back-up or a digital camera should

not cause any problems, but when streaming audio from a FireWire hard disk or a FireWire box such as Focusrite Liquid Mix, the

total FireWire bandwidth may be reached. This will result in audio drop outs, or reduced performance on either the Safﬁre PRO 14 or

the other connected FireWire device.

For this reason, we would recommend that you use a separate FireWire bus for each FireWire device. This may be a PCI / PCIe card

in your desktop, or a PCMCIA or Express card in your Laptop.

Note on FireWire Connection and Disconnection

All Safﬁre units adhere to the IEEE1394 (FireWire) standard, however it may be the case that the FireWire port on your computer

motherboard or FireWire card does not.

Connection and Disconnection from a FireWire port that does not adhere to the IEEE1394 standard may result in permanent damage

to both the Safﬁre and your computer.

To prevent permanent damage:

Connecting your unit(s)

Ensure that the computer is turned OFF

Connect the Safﬁre to your computer

Attach power supply if necessary

Turn ON your Safﬁre

Turn ON your computer

Turn ON your monitor speakers

Disconnecting your unit(s)

Shut down Safﬁre MixControl

Turn OFF your monitor speakers

Turn OFF your computer

Remove power supply if used

Disconnect your Safﬁre

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Focusrite Saffire PRO 14 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Focusrite Saffire PRO 14

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info