624383
8
Zoom out
Zoom in
Vorherige Seite
1/15
Nächste Seite
8
Your OS should automatically switch the computer’s default audio outputs to be the USB port to
which the Scarlett 2i2 is connected. To verify this:
• on Windows 7 or Windows Vista go to Start > Control Panel > Hardware and Sound >
Sound > Manage Audio Devices and ensure that Default Playback’ and Recordingare
set to ‘Scarlett 2i2
• on Windows XP, go to Start > Control Panel > Sounds, Speech and Audio Devices
> Sounds and Audio Devices > Audio tab and ensure that Sound Playbackand
Recording’ are set to ‘Scarlett 2i2
Connecting your Scarlett 2i2
IMPORTANT: Before you connect the Scarlett 2i2 to your computer,
please complete the software installation according to the
instructions above. This will ensure that the hardware uses the
correct drivers, and will prevent unexpected behaviour.
The Scarlett 2i2 has a single USB 2.0 port (on the rear panel). Once the software installation is
complete, simply connect the Scarlett 2i2 to your computer using the USB cable provided. (Note that
Scarlett 2i2 is a USB 2.0 device and thus the USB connection requires a USB 2.0+ compliant port on
your computer. It will not operate correctly with USB 1.0/1.1 ports.)
Audio Setup in your DAW
The Scarlett 2i2 is compatible with any Windows-based DAW that supports ASIO or WDM and any
Mac-based DAW that uses Core Audio. After installing the drivers and connecting the hardware,
you can start using the Scarlett 2i2 with the DAW of your choice. Ableton Live Lite is included on the
Scarlett 2i2 Resources DVD to allow you to get started if you do not already have a DAW application
installed on your computer. To install Ableton Lite Live, locate the file Ableton Live Lite on the
DVD, double-click it and follow the on-screen instructions. Operating instructions for Ableton Live
Lite are beyond the scope of this User Guide, but the application includes a full set of Help files.
Please note - your DAW may not automatically select the Scarlett 2i2 as its default I/O device. In this
case, you must manually select the driver on your DAW’s Audio Setup* page (select “Scarlett 2i2”
driver for Mac, or “Focusrite USB 2.0” driver for Windows). Please refer to your DAW’s documentation
(or Help files) if you are unsure where to select the ASIO/Core Audio driver. The example on the
following page shows the correct configuration in the Ableton Live Lite Preferences panel (Mac
version shown).
*Typical name. Terminology may differ slightly between DAWs.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Focusrite Scarlett 2i2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info