Getting started
Before connecting Scarlett 8i6 to your computer, the software must be installed. This will ensure that the correct drivers are used,
thus preventing any unexpected behaviour.
Note on USB hubs:
Scarlett 8i6 is a USB 2.0 device and must be connected to a compatible USB 2.0 port. If using a USB hub, it is essential that all other
devices connected to the hub are also USB 2.0 compatible. If any USB 1.0 / 1.1 devices are connected, the hub will be forced to run at
the legacy speed which may prevent the Scarlett 8i6 from working.
Scarlett 8i6 will use a signicant amount of USB bandwidth (the amount of data transferred via USB). If connected to a USB hub other
devices connected to the hub may affect the performance of Scarlett 8i6. For example, if using a USB 2.0 hard drive for audio sample
playback (also transferring a large amount of data) this should not be connected to the same USB hub as Scarlett 8i6. Therefore it is
recommended, when possible, to connect Scarlett 8i6 directly to your computer USB port rather than through a USB hub.
Powering the Scarlett 8i6
You must use the included power supply to use the Scarlett 8i6, it does not power from USB alone. This is because the analogue and
digital circuitry requires more power to run than the USB standard can provide.
