Bedienungsanleitung Focusrite VoiceMaster Pro (Seite 4 von 88) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

624374

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH

quarter inch jack INSTRUMENT INPUT. The INSERT SEND and INSERT

RETURN quarter inch jack connectors on the rear panel allow an additional

processor to be inserted into the signal chain between the pre-amp and the other

processing sections of the unit.

Outputs are provided on both XLR (balanced, +4 dBu) and quarter inch jack

(unbalanced, -10 dBV), and there is also a PRE DE-ESSER output XLR (balanced,

+4 dBu).

Additionally, the VoiceMaster Pro includes a mono, unbalanced FX SEND and

balanced stereo FX RETURN with quarter inch jack connectors, to allow an effects

unit to be monitored, together with balanced stereo EXT MONITOR INPUT and

MONITOR OUTPUT connections on quarter inch TRS jacks. See the LATENCY-

FREE MONITORING and the EXT MONITOR INPUT/MONITOR OUTPUT

sections on pages 10-11 for further details.

Finally, the ADC EXT INPUT (balanced, quarter inch TRS jack) allows an external

signal to be routed to the second channel of the optional digital converter card. This

allows the digital converter to be used for stereo mastering applications, as a stand-

alone A/D converter, or simply to provide a second (line level) record input. For

information on the optional digital output board, see page 11.

GETTING STARTED

1. Ensure that nothing other than the mains supply is connected to your VoiceMaster

Pro, then switch it on via the POWER switch on the right hand side of the unit. If

your unit is permanently connected to a patchbay, ensure audio is not being fed to any

connected speakers to avoid any turn-on speaker pops.

2. Connect the appropriate OUTPUT (either +4 dBu balanced XLR or –10 dBV

unbalanced jack) on the rear panel of the VoiceMaster Pro to your recorder or audio

interface. If using the digital output option, connect the digital output to the digital

input of your recorder or audio interface. See page 11 for more information on the

VoiceMaster Pro digital output option.

3. Connect the MONITOR inputs and outputs to your external kit/monitor speakers.

4. Ensure that each processing section is switched out (IN switch disengaged and

unlit), and that the PROCESS BYPASS switch is also disengaged (out).

5. Connect your input source as required. A microphone can be plugged into the

XLR MIC INPUT on either the front fascia or the rear panel. If you wish to connect

a line-level source (to use the VoiceMaster Pro's dynamics processing when mixing

down, for example) connect this to the TRS LINE INPUT on the rear panel.

Alternatively, you may connect an electric guitar or bass to the INSTRUMENT

INPUT via the unbalanced quarter inch jack input on the front fascia.

6. Check that the correct input is selected in the DISCRETE CLASS A PRE-AMP

section. If recording a line level source connected to the rear panel LINE INPUT,

ensure the LINE switch is engaged. If a microphone is connected to either of the MIC

INPUTS, or an electric guitar or bass is connected to the INSTRUMENT INPUT,

ensure the LINE switch is disengaged.

7. Make sure the phase reverse (Ø) and HPF (

) switches are disengaged and that the

INPUT GAIN control is fully counter-clockwise. Set the OUTPUT FADER to the

‘0’ position.

8. If using a condenser microphone that requires phantom power, engage the +48V

switch. If you are unsure whether your microphone requires this phantom power,

refer to its user guide. Phantom power can damage some microphones, especially

ribbon microphones.

9. Increase the INPUT GAIN control, checking the input level meter LEDs and

ensuring the red O/L LED does not illuminate, except occasionally and briefly when

the loudest signal is present.

10. If using a microphone, ensure that the microphone placement is at its best. Before

you start recording, alter the microphone placement until you get as close as possible

to the sound you want. Note that moving the microphone may have an effect on the

level of the signal entering the VoiceMaster Pro, requiring an alteration to the INPUT

GAIN setting.

11. Add additional processing as required using the various signal-processing blocks,

which may be individually switched in or out. For more information on the specific

functions of the various sections, refer to the following section, FACILITIES AND

CONTROLS.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Focusrite VoiceMaster Pro Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info