Bedienungsanleitung FoodSaver GameSaver Silver (Seite 6 von 10) (Englisch)

610574

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

www.foodsaver.com 1-877-777-8042 www.foodsaver.com 1-877-777-8042

TROUBLESHOOTING

MAINTENANCE

9 10

To Clean Appliance:

Remove Power Cord from electrical outlet. Do not immerse in liquid.

Check Gaskets and around Drip Tray to make sure they are free from

food materials. Wipe off gasket with warm soapy cloth if needed.

Bottom gasket may be removed for cleaning. Clean with warm, soapy

water. The top gasket is not removable.

The Removable Drip Tray makes cleanup easy when small amounts

of liquids are inadvertently pulled into the Vacuum Channel during

vacuum process.

Empty Drip Tray after each use. Wash in warm soapy water or place

in top rack of dishwasher. Dry thoroughly before re-inserting into the

appliance.

Always leave lid latch in open or store position, never leave in closed

position. When appliance is left in closed position, the gaskets

become compressed and the unit may not function properly.

Do not leave appliance outside in the environment while not in use.

Care and Cleaning

Remove All Food

Around Gaskets

Lift Drip Tray Out

BOTTOM GASKET

ONLY IS REMOVABLE

FOR CLEANING

Problem Solution

Red Seal LED flashes • Unit is overheated, wait for 20 minutes for unit to cool down

• If trying to seal an end of a roll to make a bag, make sure the bag is on the

seal strip

• If storing unit, make sure that latch is in Store position and not Closed

position. If in Closed position for extended period of time the gaskets become

compressed.

Pump is running

for more than 2

minutes without bag

vacuuming (no visible

air coming out of bag).

• Make sure bag is inserted curl down in the vacuum channel.

• Check to make sure top and bottom gaskets are inserted properly.

• Check to make sure that at least one end of bag is sealed.

• Open unit and check to make sure that there are no foreign objects, dirt or

debris on the top or bottom gasket.

• Make sure there is enough room at top of bag (3 inches) to fit to middle of

drip tray with lid closed and latched.

• Make sure accessory hose is not attached.

• Make sure the lid is latched down all of the way.

Bag is not sealing

properly.

• There is too much liquid in bag, freeze bag contents before vacuuming.

• To prevent wrinkles in the seal, gently stretch bag flat while inserting bag into

vacuum channel and continue to hold bag until vacuum pump starts.

• Create a second seal above the first seal on the bag to ensure a proper seal

when sealing moist foods.

There are no lights on

the control panel.

• Make sure unit is plugged in.

• Make sure wall outlet is functional.

• Make sure latch is in Closed position.

Nothing happens

when latch is closed

and Vac/Seal or Seal

button is pressed.

• Make sure unit is plugged in.

• Make sure wall outlet is functional.

• Open latch, make sure lid is all the way down, re-latch lid.

DC Power is not

working

• Check if fuse in vehicle power outlet is working.

• Battery of vehicle may be low- start vehicle motor.

• Check if fuse in 12 Volt DC Adapter is working.

Troubleshooting

Tips

for using Your FoodSaver GameSaver

Appliance

Tips on Sealing a Bag

When making a bag from a roll, make sure end of

cut piece is on Sealing Strip, not over rubber gasket

or in Vacuum Channel.

Prevent moisture or liquid from being pulled into

the Vacuum Channel or trapped in the seal. Either

pre-freeze moist foods such as raw meat for

1–2 hours before vacuum packaging, or place a

folded paper towel between food and end of bag

to absorb excess liquids. Be sure to leave at least 3

inches between paper towel and end of bag so that

bag seals properly with paper towel inside.

Tips on Removing Air from a Bag

When vacuum packaging make sure open end of

bag is inside Drip Tray with curl down. Also make

sure roll itself is tucked back into Roll Storage

Compartment or it could prevent appliance from

operating properly.

Check for wrinkles in the bag along the Sealing Strip

before closing lid and vacuum packaging. Wrinkles

in seal may cause leakage and allow air to come

back into bag. If you find wrinkles after sealing bag,

simply cut bag open and vacuum package again.

If Motor runs for more than 30 seconds without

stopping, you may need to adjust bag and try

again. If you are making initial seal on a piece of

bag material with two open ends, make sure you

have pressed the Seal and not Vac/Seal Button. If

you are vacuum packaging with a bag, make sure

open end is placed down inside Vacuum Channel

and make sure Accessory Hose is not attached. Also

check that gasket is clean and free of debris. If you

are vacuum packaging with an accessory, check

Accessory Hose in appliance lid and in accessory

to ensure a tight fit.

TIPS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

FoodSaver GameSaver Silver Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info