Bedienungsanleitung FoodSaver IFS005X (Seite 6 von 108) (Alle Sprachen)

783496

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

www.foodsavereurope.com 6

Parts

See figure 1

6. Press the Vacuum and Seal button T. Your

FoodSaver

appliance

will start to remove the air from the bag. When the

vacuum progress light has gone out, the bag starts to seal (the

sealing progress light comes on).

7. The process is complete when the sealing progress light goes

out.

Sealing a bag without removing any air

To seal a bag without extracting the air from it press the Instant Seal

button S (the process is complete when the sealing light goes out).

You can seal the types of bag that are used to package snacks such

as potato crisps, tortilla chips, etc.

Using the Pulse Vacuum button

Some items such as pastries, bread, biscuits, etc. can be crushed

when vacuuming. To prevent this use the Pulse Vacuum button R as

follows:

1. Follow steps 1, 2, 3, 4 and 5 of Using Your Vacuum Sealer.

2. Press and hold the Pulse Vacuum button

as required. The

vacuum pump will operate as long as the button is held down.

Release the button before crushing occurs. This will immediately

stop any more air from being extracted.

3. Press the Instant Seal button S immediately after vacuuming.

The sealing progress light will come on. The process is complete

when the sealing progress light goes out.

NOTE: If the vacuum pump stops while pressing the Pulse Vacuum

button, it means the maximum vacuum has been reached and no

more air can be extracted.

Using FoodSaver accessories

1. Insert one end of the accessory hose K into the accessory

port J on the FoodSaver

appliance. Insert the other end of

the hose into the port on the accessory and make sure that it is

connected firmly. Follow any specific instructions that come with

the

FoodSaver

accessory.

2. Close the lid and move the latch H to the closed position

( ).

3. Press the Canister/Accessory button N. The process is

complete when the progress light goes out.

NOTE: The length of time required to extract all the air from the

accessory will depend on the size of the accessory.

Making a bag from a FoodSaver roll

You can make your own custom sized bags from a

FoodSaver

roll.

Referring to Fig. 2:

1. Plug your vacuum sealer in to a mains supply socket. Move

the latch H to the open position ( ) and open the lid. If

you haven’t already done so, place the

FoodSaver

roll into the

storage area G then lift up the roll cutter bar C and feed the

roll end under the bar. Pull the roll end out until about 10mm of

the roll overlaps the sealing strip E.

2. Close the lid all the way and move the latch H to the closed

position ( ). Press the Instant Seal button S. When the

sealing light goes out, open the lid. The end of the roll will now

have been sealed.

3. Pull the roll out to the required length for the item being

packaged. Add an extra 75mm to allow the bag to be sealed then

slide the roll cutter B across to cut the roll.

You can then start to use your vacuum sealer (refer to Using Your

Vacuum Sealer).

Using Your Vacuum Sealer

Referring to Fig. 3:

1. Place the item to be packaged into the bag. You can use a ready

made

FoodSaver

bag or make your own from a

FoodSaver

roll.

2. Place the open end of the bag into the slot of the drip tray F.

3. Close the lid and move the latch H to the closed position ( ).

4. If desired, press the Speed button L to select the Fast, Normal

or Slow speed setting. Select Slow for delicate foods; Normal for

average sized bags, canisters and all accessories; Fast for larger

sized bags and canisters.

5. If you are packaging foods that are moist or are very juicy, press

the Food Type button O once (the Moist Food light Q comes

on). For dry foods, make sure the Dry Food light P remains on

(this is the default).

AUpper gasket LSpeed button

BRoll cutter MSpeed lights (Slow/Normal/Fast)

CRoll cutter bar NCanister/Accessory button

DLower gasket OFood Type button

ESealing strip PDry Food light

FRemovable drip tray QMoist Food light

GRoll storage RPulse Vacuum button

HLatch SInstant Seal button

IControl panel TVacuum and Seal button

JAccessory port UPower light

KAccessory hose

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

FoodSaver IFS005X Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info