Bedienungsanleitung FoodSaver V2244 (Seite 7 von 8) (Englisch)

610561

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

www.foodsaver.com 1-877-777-8042 www.foodsaver.com 1-877-777-8042



11 12

1. Prepare container according to FoodSaver

Accessory Guidelines.

2. Insert one end of Accessory Hose into Accessory

Port on appliance. Insert other end into port on

accessory. Twist tab on Accessory Hose while

inserting to ensure a tight fit.

3. Close lid, rotate Latch, press Vacuum & Seal

Button.

4. When motor and Indicator Light turn off, vacuum

process is complete. Note that the appliance

will still go through sealing cycle even when

vacuuming an accessory. You will hear Motor

shut off and then the sealing cycle will begin.

5. Gently twist and remove Accessory Hose from

accessory and appliance.

6. To test vacuum, simply tug on accessory lid. It

should not move.

Note: For important tips on using accessories with

different foods, please refer to the FoodSaver

Reference Guide.

How to

Vacuum Package with FoodSaver

Accessories

FoodSaver Vacuum Packaging Canisters (without

large knob on lid)

To release vacuum and open, push gray rubber

button on lid.

FoodSaver Bulk Canisters and Quick Marinators

(with large knob on lid) and Universal Lids.

To release vacuum and open, turn knob on lid to

Open.

FoodSaver Jar Sealer with Mason Jars

For use with Ball

and Kerr

brand Mason jars.

Important: Do NOT use screw bands when vacuum

packaging jars. To open, wedge spoon between

Mason jar lid and highest part of threaded rim.

Twist spoon gently to release vacuum.

FoodSaver Bottle Stoppers

To release vacuum and open, twist and pull up

on Bottle Stopper.

How to

Open FoodSaver

Accessories after Vacuum Packaging

To Clean Appliance:

Remove Power Cord from electrical outlet. Do not immerse in liquid.

Check Gaskets and around Drip Tray to make sure they are free from food

materials. Wipe off Gasket with warm soapy cloth if needed. Upper and

Lower Gaskets may be removed for cleaning. Clean with warm, soapy water.

The Removable Drip Tray makes cleanup easy when small amounts of

liquids are inadvertently pulled into the Vacuum Channel during vacuum

process.

Empty Drip Tray after each use. Wash in warm soapy water or place in top

rack of dishwasher. Dry thoroughly before re-inserting into the appliance.

Always leave lid latch in open position. Never store lid in latched position

as gaskets may become compressed. When appliance is left in closed

position, the Gaskets become compressed and the unit may not function

properly.

Care and Cleaning

Remove All Food

Around Gaskets

Lift Drip Tray Out



Problem

Solution

Red Seal LED Flashing • Unit is overheated. Always allow 20 seconds between seals. Under heavy

usage, appliance will shut off automatically and Red Light will flash. Wait for

20 min. for unit to cool off.

• Always wait 20 seconds between seals.

• Latch has been left closed position: Gaskets may be compressed. Unlatch and

allow 10 to 20 minutes for Gaskets to expand.

• Vacuum pump running more than 120 seconds. Under heavy usage, appliance

will shut off automatically and Red Light will flash. See next section Vacuum

Pump is running, but bag is not evacuating.

Vacuum Pump is

running, but bag

is not evacuating

• If making a bag from a roll, make sure one end of bag is sealed. See How to

Make a Bag from a FoodSaver

Vacuum Sealing Roll.

• Adjust the bag and try again. Make sure the open end of the bag in down

inside the vacuum channel.

• Check for wrinkles in bag along Sealing Strip. To prevent wrinkles in the seal,

gently stretch bag flat while inserting bag into Vacuum Channel.

• Open unit and make sure Gaskets are inserted properly and there are no

foreign objects, dirt or debris on the Upper or Lower Gasket (See Care and

Cleaning).

• Latch has been left closed position: Gaskets may be compressed. Unlatch and

allow 10 to 20 minutes for Gaskets to expand.

• Make sure the accessory hose is not attached to accessory port.

• Make sure the lid is latched down all the way. If the Latch does not catch the

lid and bring it down, there will be a leak between the Gaskets.

Gasket is loose or has

a tear

• Take out the gasket, clean it and reinsert the Gasket into the Vacuum Channel

(See Care and Cleaning).

• Call 877-777-8042 or visit website for replacement.

Bag is not sealing

properly

• Too much liquid in bag, freeze before vacuuming.

• Check for food debris around seal area. If present, Take out the gasket, clean

it and reinsert the Gasket into the Vacuum Channel (See Care and Cleaning).

• Bag has wrinkles: To prevent wrinkles in the seal, gently stretch bag flat while

inserting bag into Vacuum Channel.

No lights on the

control panel

• Make sure unit is plugged in.

• Make sure wall outlet is functional.

• Make sure lid is all the way down, and the Latch is in the locked position.

Trouble-Shooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

FoodSaver V2244 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info