Bedienungsanleitung FoodSaver VS3190X (Seite 6 von 65) (Alle Sprachen)

783488

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

www.foodsavereurope.com www.foodsavereurope.com

10 11

Problem Solution

Air was removed from the bag,

but now air has re-entered

• Examine the seal. A wrinkle along the seal may cause air to re-enter the bag. To prevent wrinkles in the

seal, gently stretch bag at while inserting bag into Drip Tray.

• Sometimes moisture or food material (such as juices, grease, crumbs, powders, etc.) along seal prevents

bag from sealing properly. Cut bag open, wipe top inside of bag and re-seal.

• Sharp food items may have punctured bag. Use a new bag if there is a hole. Cover sharp food items with a

soft cushioning material, such as a paper towel, and re-seal.

• Fermentation or the release of natural gases from inside the foods may have occurred. When this happens,

food may have begun to spoil and should be discarded.

• Faulty bag. Bag could be punctured. Try another bag.

Bag melts

• Sealing Strip may have become too hot. Always wait at least 20 seconds for appliance to cool down before

you vacuum seal another item.

• Use FoodSaver® brand bags. Our FoodSaver® Bags and Rolls are specially designed for FoodSaver® units.

Container does not vacuum

• The lid of the container must be correctly placed on and aligned to the container.

• Make sure you press the Handheld Button.

• Make sure lid is closed securely on all 4 sides.

• Make sure rubber gasket on inside of lid is free from food residues.

• Examine rim of container for cracks or scratches. Make sure container valve is clean.

Problem Solution

Seal LED flashing

• Unit is overheated. Always allow 20 seconds between seals. Under heavy usage, appliance will shut off

automatically and Seal Light will ash. Wait for 20 min. for unit to cool off.

• Always wait 20 seconds between seals.

• Latch has been left in Operate position: Gaskets may be compressed. Turn Latch to Open or Store position

and allow 10 to 20 minutes for Gaskets to expand.

• Vacuum pump running more than 120 seconds. Under heavy usage, appliance will shut off automatically and

Seal Light will ash. See next section Vacuum Pump is running, but bag is not evacuating.

• Latch was left in On position for 5 minutes and not being used reminding user to turn Latch to Open or Store

position.

Vacuum Pump is running, but bag

is not evacuating

• If making a bag from a roll, make sure one end of bag is sealed. See How to Make a Bag from a FoodSaver®

Vacuum Sealing Roll.

• Adjust the bag and try again. Make sure the open end of the bag is down inside the Drip Tray.

• Check for wrinkles in bag along Sealing Strip. To prevent wrinkles in the seal, gently stretch bag at while

inserting bag into Drip Tray.

• Open unit and make sure Gaskets are inserted properly and there are no foreign objects, dirt or debris on the

Upper or Lower Gasket.

• Latch has been left in Operate position: Gaskets may be compressed. Turn Latch to Open or Store position

and allow 10 to 20 minutes for Gaskets to expand.

• Make sure the lid is latched down all the way. If the Latch does not catch the lid and bring it down, there will be

a leak between the Gaskets.

Gasket is loose or has a tear

• Take out the gasket, clean it and re-insert the Gasket into the Gasket Channel.

• If Gasket has minor damage remove, ip over and reinstall.

• Visit website for replacement.

Bag is not sealing properly

• Too much liquid in bag, freeze before vacuuming.

• Check for food debris around seal area. If present, take out the gasket, clean it and re-insert the Gasket into

the Vacuum Channel.

• Bag has wrinkles: To prevent wrinkles in the seal, gently stretch bag at while inserting bag into Gasket

Channel.

No lights on the control panel

• Make sure unit is plugged in.

• Make sure wall outlet is functional.

• Make sure lid is all the way down, and the Latch is in the Operate position.

Nothing happens when Latch is

closed and Button is pressed

• Make sure unit is plugged in.

• Make sure wall outlet is functional.

• Open Latch, make sure lid is all the way down, re-latch lid.

Cannot insert bag into machine

• Make sure there is enough bag material to reach centre of drip tray. Always allow three inches (7.62 cm) extra

space to allow the bag to seal tightly around food contents.

• Gently stretch bag at while inserting. Insert bag curl down into Drip Tray.

Troubleshooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

FoodSaver VS3190X Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info