Bedienungsanleitung Foppapedretti Supertres (Seite 83 von 144) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

768984

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

SuperTres 15

THE HARNESS

FASTENING THE HARNESS

- Slot the two plastic sections of the buckle connectors together Fig 1

- Slot the two connectors into the hole in the top of the buckle until they “click” into place

Fig 2

- Always check that the harness is correctly locked by pulling above and below the buckle Fig 3

- The harness should be adjusted as tightly as possible without causing discomfort to the

child. A loose harness is dangerous and should be checked each time that you use the seat.

To tighten the harness, pull down on the adjustment strap (3) until the harness is the correct

tightness Fig. 4

- The harness is loosened by pulling on both straps at the same time press down on the harness

adjuster that is located on the shell underneath the “Press” (2) word stitched on the cover

Fig. 5

UNFASTENING THE HARNESS

To release the harness, push the red button in the middle of the harness buckle inwards.

You can now lift your child from the seat; ensure that the buckle connectors do not catch on

clothing.

BEFORE YOU INSTALL THE CAR SEAT

ADJUSTING THE SHOULDER HEIGHT

Before you install the car seat, it is very important that you make sure the shoulder straps are

at the right height for your child. They should be level or just below your child’s shoulders.

The harness has 2 positions Fig.6, Fig.7, Fig.8.

Winter/Summer clothing can a make a difference to the size of your child.

Place the car seat on a level oor surface with the handle in the stable position see text The

handle position.

Place your child in the car seat and identify the correct shoulder position.

Remove your child from the car seat.

Slacken the shoulder straps by pressing the harness release button (1) at the same time,

pulling both shoulder straps forward with your other hand (2) Fig.9.

Press the red release button (3) and unhook the harness.

Remove the shoulder straps from the small seat, cover and chassis in plastic, by pulling each

shoulder strap, including buckle, through its corresponding slot Fig.10.

Do not remove the shoulder straps from the loop of the harness adjuster strap.

Insert the shoulder straps into the chosen slots, passing through the slots of the chassis in

plastic at rst, then through the cover and at last the small seat Fig.11 Fig.12.

The harness has 2 positions. The straps should be put into the nearest slots above the shoulders

of the child.

Make sure that there are no twists of the webbing and that the shoulder straps are correctly

inserted in the loop of the harness adjuster strap Fig.11, Fig.13.

Now place your child in the car seat and check that the shoulder straps are in the correct

position for your child’s shoulder Fig.14.

FITTING YOUR CAR SEAT INTO THE CAR

WARNING:

This car seat can only be tted into the passenger seat of a car with a lap and diagonal seat

TO USE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Foppapedretti Supertres Seite 83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info