PRINCIPLE OF OPERATION
The system allows you to program keys
with restricted driving modes to promote
good driving habits. You can use all but one
of the keys programmed to your vehicle
with these restricted modes.
Any keys that have not been programmed
are referred to as an administrator key or
admin key. These can be used to:
• create a MyKey
• program optional MyKey settings
• clear all MyKey features.
When you have programmed a MyKey, you
can access the following information using
the information display:
• How many admin keys and MyKeys are
programmed to your vehicle.
• The total distance your vehicle has
traveled using a MyKey.
Note: Switch the ignition on to use the
system.
Note: All MyKeys are programmed to the
same settings. You cannot program them
individually.
Standard Settings
The following settings cannot be changed:
• Safety belt minder. You cannot disable
this feature. The audio system will
mute when this feature is activated.
• Low fuel level warning. When the fuel
level is low, warnings will be shown in
the display followed by an audible
tone.
• Driver assist features, for example
navigation and parking aids. These
systems turn on automatically
whenever you switch the ignition on.
Optional Settings
You can configure MyKey settings when
you first create a MyKey. You can also
change the settings afterward with an
admin key.
The following settings can be configured
using an admin key:
• Various vehicle speed limits can be set.
Warnings will be shown in the display
followed by an audible tone when your
vehicle reaches the set speed. You
cannot override the set speed by fully
depressing the accelerator pedal.
• Various vehicle speed reminders can
be set. Warnings will be shown in the
display followed by an audible tone
when the set vehicle speed is
exceeded.
• Audio system maximum volume of
45%. A message will be shown in the
display when you attempt to exceed
the limited volume. Automatic volume
control will be disabled.
• Always on setting. When this is
selected you will not be able to disable
emergency assistance or the do not
disturb feature.
Vehicles with Keyless Entry
If a MyKey and an admin key are present,
your vehicle will recognize the admin key
only.
CREATING A MYKEY
Vehicles without Keyless Starting
1. Insert the key you want to program into
the ignition.
2. Switch the ignition on.
3. Access the main menu using the
information display. Select MyKey and
press OK or the right arrow button.
30
B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 31-12-2013
MyKey™
