If the needle enters the red section, the
engine is overheating. Stop the engine,
switch the ignition off and determine the
cause once the engine has cooled down.
See Engine Coolant Check (page 209).
Oil temperature gauge
Indicates the temperature of the engine
oil.
At normal operating temperature, the
needle remains within the normal area.
If it enters the red section, the engine is
overheating. Reduce engine speed as soon
as safely possible to allow the engine to
cool. If the engine is continued to be driven
at high engine speeds with the needle in
the red section, the engine speed will be
reduced automatically to prevent engine
damage.
Turbocharger boost gauge
Indicates the added intake pressure
provided by the turbocharger.
Oil pressure gauge
WARNING
Driving with your oil pressure gauge
pointer continuously in the red
section of the scale may damage the
engine.
Note: When the engine is cold, oil pressure
close to 5 bar may be indicated. This is
normal. As the engine warms up, the oil
pressure will drop.
This gauge indicates engine oil pressure
up to a recommended safe maximum of
5 bar.
During normal driving the indicated oil
pressure will vary with engine speed, the
pressure rising as engine speed rises and
dropping as engine speed drops.
If the engine oil pressure drops below the
normal range, the oil pressure gauge
pointer will drop into the red section of the
gauge scale and the engine oil pressure
warning lamp in the main instrument
cluster will illuminate. Stop the vehicle as
soon as safely possible and switch off the
engine immediately. Check the oil level and
add oil if needed. See Engine Oil Check
(page 208).
Fuel gauge
The arrow adjacent to the fuel pump
symbol indicates on which side of the
vehicle the fuel filler cap is located.
WARNING LAMPS AND
INDICATORS
The following warning lamps and
indicators illuminate when the ignition is
switched on:
• Airbag
• ABS
• Stability control (ESP)
• Low fuel
• Brake system
• Frost
• ESP off
If a warning or indicator lamp does not
illuminate when the ignition is switched
on, it indicates a malfunction. Have the
system checked by properly trained
technician.
ABS warning lamp
If it illuminates when you are
driving, this indicates a
malfunction. You will continue
to have normal braking (without ABS).
Have the system checked by a properly
trained technician as soon as possible.
73
Instrument Cluster
