Bedienungsanleitung Forever KW-400 CareMe - Kids Watch (Seite 6 von 8) (Englisch)

725153

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

10 11

ID: 1451498657; (ID must correspond to the number provided on the

plate included with the watch and on the bottom of the package)

imei:359614514986574;check whether IMEI is correct

ip_url: 52.28.132.157;check whether ip is correct

port:8001;check whether port is correct

center:;

slave:;

sos1:;

sos2:;

sos3:;

upload:600S;

bat level:96;

language:1;

zone:8.00;

GPS:NO(0);

GPRS:OK(73);

pw:123456;

Compare data included in the SMS with the watch number. If the ID

number is dierent from the number provided on the plate included

with the watch or on the bottom of the package, set new IMEI num-

ber. Send the following SMS from a phone to the number of the card

installed in the watch: pw,123456,imei,xxxxxxxxxxxxxxx# – after

receiving the SMS, the watch will respond with SMS including the cor-

rect IMEA number, for example: pw,123456,imei,359614514986574#

– Check whether the ID number matches the ID number of the watch

provided in the devices list in the application.

- You may not call the watch. The signal is busy or the subscriber

does not answer the call.

Reason:

The watch does not recognize the incoming number or the applica-

tion is set to “do not disturb” mode.

Solution:

– Check whether the number you are calling from is not restricted.

– Check whether there are contact numbers set in the application.

The watch only answers the calls from numbers that were previously

set in the application contacts.

- The application does not update location in real-time. It selects

LBS locations only

Reason:

GPS signal is too weak to locate the watch or the watch is in sleep mode.

Solution:

– Leave the building with the watch and press the “LOCATION” func-

tion in the “MAP” function.

– Remember that the application allows to set appropriate watch

operation mode. This is associated with the frequency of collecting

data, also those related to the location. In the energy-saving mode,

data is send once every hour. Therefore, to maintain full control of

the location in real-time, it is recommended to use normal mode,

which collects data every 10 minutes, or tracking mode, in which data

is collected every minute.

- The watch does not display current time and date

Reason:

The watch failed to connect with the application server in order to

update time.

Solution:

– Time may also be updated in connection with GPS location. It may

be checked by going outside and using GPS localizer function.

– If the watch is several hours behind, check and select appropriate

time zone via the application.

– If the aforementioned activities will not solve the problem, send

the following SMS from your phone (to the number of the SIM card

installed in the watch): pw,123456,ntpservers,121.40.88.40,8089#

The watch should respond with an SMS with similar contents. Then,

restart the watch.

– Additionally, you may also send a conguration SMS to the SIM

number in the watch with the following contents: pw,123456,ti-

me,hour.minute.second,date,year.month.day# – including, for exam-

ple, the current time pw,123456,time,09.50.00,date,2016.06.01#

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Forever KW-400 CareMe - Kids Watch Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info