Bedienungsanleitung Foscam FHC994 (Seite 3 von 3) (Englisch)

602523

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

Foscam FHC994 Intelligent Security Camcorder User Manual

Mode switch

Switch between surveillance, on-the-go and custom modes. Default settings are in parentheses.

Note: For custom mode configuration, please use the third party PC software Widget to change

the settings. The widget can be downloaded from www.foscam.us/pc-software-widget. To make the

custom mode settings effective, please push the mode switch to the “custom

mode” position before powering up the FHC994.

Surveillance

Video Quality

Resolution

Frame Rate

Indoor Lighting

Condition

Day / Night Mode

Orientation

Time Stamp

Circular Recording

Split File Time (min)

Mic

LED On / Off

Voice-Trigger

Sensitivity

Vibration-Trigger

Sensitivity

Vibration Standby Mode

Motion-Trigger

Sensitivity

Auto On / Off

High

640x360

High

50Hz

Day mode

Normal

Enable

Disable

N/A

Disable

On-the-GO

High

1280x720

High

50Hz

Day mode

Normal

Enable

Disable

N/A

Medium

Custom (default)

(High) / Medium / Low

1280x720 / (640x360)

(High) / Low

(50Hz) / 60Hz

(Day mode) / Night mode / Auto

switching

(Normal) / Up-side-down

(Enable) / Disable

10 / (15) / 20

(Enable) / Disable

(On) / Off

High / Medium / Low / (Disable)

High / (Medium) / Low / Disable

Fast Wake Up / (Power Saving)

High / Medium / Low / (Disable)

PC Software Widget

To synchronize the time and customize settings, download a PC software “Widget” from the following website:

www.foscam.us/pc-software-widget - follow the instructions in the software guide.

NOTE: If the time shown is year 2026 or beyond due to a loss of Real Time Clock,

recording time will not be shown on the video, even if the timestamp is enabled. Please use

the widget to resync the time and delete files created in 2026 or beyond!

Connecting to computer

connect the camcorder to your computer, follow these instructions:

Connect the larger end of the USB cable into an available USB port on the computer.

Connect the smaller end of the cable into the USB port of the camcorder.

The camcorder will appear in My Computer as a drive.

Firmware upgrades

Foscam will from time to time release new firmware for enhancements or adding new features.

Visit www.foscam.us/firmware to check on the latest firmware for your FHC994.

Technical Support

To contact us, please call 1-800-930-0949, or e-mail us at support@foscam.us.

Environmental Requirements

Storage temperature: 32˚ to 113˚F (0˚ to 45˚C)

Operating temperature: 32˚ to 113˚F (0˚ to 45˚C)

FCC Regulation

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1 This device may not cause harmful interference, and

2 This device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause interference to radio or television reception, which can be deter-

mined by turning the equipment off and then on, the user is encouraged to try to correct the

interference by one or more of the following measures:

1 Increase the separation between the equipment and camcorder.

2 Connect the equipment to a different outlet so that the equipment and camcorder are

on different branch circuits.

3 Consult the dealer or an experienced radio / TV technician for help.

Disable

Scheduled Recording /

Car-activate Recording /

Car-stop Recording /

Car-activate and Car-stop Re-

cording /

(Disable)

When the FHC994 is connected to the lighter through the 5V car adapter and the auto on /off mode is selected:

Car-activated Recording: Auto-starts recording once the car is started, auto-stops recording when car is stopped.

Car-stop Recording: Auto-starts recording when car is stopped, auto-stops recording once car is started.

Car-activate and Car-stop Recording: Auto-starts recording once car is started and continues to record

even when the car is stopped. The camcorder needs to be turned off manually.

* For the longest recording time, set Video Quality to Low, Resolution to 640x360 and Frame Rate to Low. This way

the FHC994 can act as a digital voice recorder.

** If a recording is started, you cannot switch between modes.

*** If triggering is enabled, the FHC994 will record for 10 seconds after powering-up. Then it will go into standby. If there

is a trigger, it will keep recording until there are no further triggers. After that, it will record for 2 more minutes and

then standby again.

www.foscam.us

version: 1.0

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Foscam FHC994 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info