516805
26
Zoom out
Zoom in
Vorherige Seite
1/39
Nächste Seite
IPCAM User Manual
- 23 -
Figure 3.3
1) Use Network cable connect IP Camera to the LAN.
2) Enter IP Camera Tool to set the basic configuration.(details: 2.1
)
3) login the Camera homepage as Administration.
4) Enter DDNS Settings Page and ennable DDNS service .Click <Submit> and the
device will reboot. (details: 2.5.3
)
5) You can access the Camera from Internet by domain name.
3.5 Static IP user
Static IP user is not need to use DDNS for remote access. When finished the setting of the
IP Camera in LAN,you can access the Camera directly from Internet by the WAN IP.You
can obtain the WAN IP by two ways.
Obtain the WAN IP from some Website
You can discover this easily by opening on a computer using the same connection as the
IP camera and entering this address: http://www.whatismyip.com
.The page at this
address will show you the current WAN IP.
Figure 3.4
Obtain the WAN IP address from the router
Take the WRT54G router of LINKSYS for example,
1) Obtain the IP address of the router(LAN gateway address),user name and password
for logon to the router from the network administrator,
2) Enter the LAN IP address of the router(LINKSYS WRT54G default:192.168.1.1) in the
address bar of the IE to log on to the router;Open the Status page to find out the WAN
address of the router.In this example,the address is 116.25.51.115.
Access the IP Camera from the Internet
User can access the IP Camera from the Internet,Enter WAN IP address + port number in
the IE to access IP Camera.For example, Http:// 116.25.51.115:85
Note: Make sure the Port mapping is success.You can do port mapping by two ways:
Enter setting page of the router which ipcamera connect with to enable UPNP
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Foscam FI 8904W wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Foscam FI 8904W

Foscam FI 8904W Bedienungsanleitung - Deutsch - 28 seiten

Foscam FI 8904W Installationsanweisung - Holländisch - 15 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info