Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
Step 1: Open the IP Camera Tool, select the camera you would like to change the port of, right click on
the IP address, and click on ”Network Configuration”, this brings up the network configuration box as
flowing figures.
Step 2: Enter the username and password of the Administrator (default username is admin with a blank
password), and click “OK” to apply changes.
Step 3: Wait around 10 seconds, you’ll see that the camera’s LAN IP address has changed. In our
example it was changed to 2000, so we see http://192.168.8.102:2000 in IP Camera Tool. Also, the LAN
IP address is now fixed at a static IP address of http://192.168.8.102:2000. This IP address will not
change even if the camera is powered off and back on, the camera will remain on this LAN IP address.
This is very important that a static LAN IP address is set, or you may have problems later with remote
access and seeing the camera remotely if the camera loses power and reconnects on a different LAN IP
address. Make sure you set a static LAN IP address!
