516814
47
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
User Manual
Model: FI8608W
Indoor Pan/Tilt Wireless IP Camera
NIGHT VISION & REMOTE PAN / TILT ROTATE/
TWO WAY AUDIO
Black White
CONTENTS
1 WELCOME..................................................................................................................................................... 1
1.1 Features .................................................................................................................................................. 1
1.2 Packing List ............................................................................................................................................. 2
1.3 Product views .......................................................................................................................................... 2
1.4 Preparations before use .......................................................................................................................... 4
2 SOFTWARE OPERATION ............................................................................................................................. 6
2.1 IP Camera Tool ........................................................................................................................................ 6
2.2 Camera Login ........................................................................................................................................ 10
2.3 For Visitor .............................................................................................................................................. 15
2.4 For Operator .......................................................................................................................................... 18
2.5 For Administrator ................................................................................................................................... 19
3 How to configure settings in For Administrator ............................................................................................. 21
3.1 Date & Time Settings............................................................................................................................. 21
3.2 User Settings ......................................................................................................................................... 23
3.3 Basic Network Settings.......................................................................................................................... 23
3.4 Wireless Settings................................................................................................................................... 27
3.5 Remote Access...................................................................................................................................... 27
3.6 Email Settings........................................................................................................................................ 28
3.7 FTP Settings.......................................................................................................................................... 29
3.8 Auto Capture.......................................................................................................................................... 30
3.9 Motion Detection.................................................................................................................................... 31
3.10 Alarm ................................................................................................................................................... 33
3.11 Schedule .............................................................................................................................................. 34
3.12 Video ................................................................................................................................................... 36
3.13 Image Settings..................................................................................................................................... 38
3.14 Audio Settings...................................................................................................................................... 39
3.15 Initialize................................................................................................................................................ 40
3.16 Back..................................................................................................................................................... 40
4 Other Settings .............................................................................................................................................. 40
4.1Use Mobile to login ................................................................................................................................. 40
4.2 For MAC OS .......................................................................................................................................... 41
WWW.FOSCAM.COM FI8608W User Manual
Supports SD card
Supports RTSP port number
Wi-Fi compliant with wireless standards IEEE 802.11b/g/n
Support WEP ,WPA and WPA2 Encryption
Supports remote viewing & record from anywhere anytime
Multi-level users management with password protection
Embedded Web Server for users to visit by IE
Motion detection alert via email or upload image to FTP
Supporting Dynamic IP (DDNS) and UPnP LAN and Internet
Supports multiple network protocols: HTTP /TCP /IP /UDP /FTP /DHCP /DDNS /UPNP
Providing CMS software to manage or monitor hundreds of cameras
1.2 Packing List
Untie the package and verify the items with the following list:
IPCAM×1
WIFI Antenna×1(only available for wireless mode)
DC Power Supply×1
Quick Installation Guide×1
CD×1Includes IPCAM user manualIP camera toolH.264 Camera Client
Network Cable×1
Mounting bracket×1(option)
Warranty Card×1
NOTE: Please Contact us immediately in case of any damaged or missing parts.
1.3 Product views
1.3.1 Front View
Figure 1.1
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
2
WWW.FOSCAM.COM FI8608W User Manual
Infrared LED: 11 IR LEDs
LENS: CMOS sensor with fixed focus lens. (3.6mm)
WIFI Antenna: Wireless Antenna
Microphone: Built-in microphone
Speaker: Built-in speaker
1.3.2 Back View
Figure 1.2
LAN: RJ-45/10-100 Base T
Power: DC 5V/2A Power supply
Power Light: If the power adapter works well,the light will turn on.
SD Card Light: If you have plugged in the SD card, the light will turn on
SD card: Support to 32G
Audio Input: This jack is used to plug an external microphone
Audio Output: This jack is used to plug an external speaker
1.3.3 Bottom View
There are up to three labels located at the bottom of the camera; this is an important feature of
original Foscam cameras. If your camera does not have labels as shown in Figure 1.3, it may be
a clone. Cloned Foscam cameras can not use original firmware and are not eligible for warranty
or technical services.
Figure 1.3
Reset button: Press and hold down the RESET BUTTON for 15 seconds, when released the IP
camera will be reset back to factory default settings.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
3
WWW.FOSCAM.COM FI8608W User Manual
1.4 Preparations before use
1.4.1 Software installation
1) Put the CD in the CD drive of your computer. Open the CD; find the software per instructions;
2) Double click IPCamSetup.exe and install the software per instruction.
Figure 1.4
3) Click Next to complete the software installation.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
4
WWW.FOSCAM.COM FI8608W User Manual
(3) Plug the power adapter into the camera and then into the power outlet.
CAUTION: Make sure that only the power adapter supplied with your IPCAM is used. Using
a non-approved power adapter may damage the camera.
(4) Turn on the power, the power light on the power adapter will be visible.
(5) When the camera is powered up, if the network cable is plugged in correctly, the small green
light on the camera network socket will turn on, and the small yellow light will flash. The
network light will blink, about 1~2 times per second.
(6) The camera takes approximately 30 seconds to start up before it displays an IP address on
the IP Camera Tool (details: 2.1).
2 SOFTWARE OPERATION
2.1 IP Camera Tool
When the Device has been mounted properly, you can double click the icon “IP Camera Tool”
and a dialog box as Figure 2.1 will pop up.
Figure 2.1
The software searches for the IPcam automatically over the LAN.
Our company has two series: H.264 and MJPEG. M shows that the camera belongs to MJPEG
series. H shows that the camera belongs to H.264 series. FI8608W belongs to H.264 series.
There are 3 cases:
(1) If no Camera found in LAN. After about 1 minute of searching, the Result Field will show
“not found IP Server” and the program shuts off automatically.
(2) If IP Cameras have been found within LAN. All the IP Cameras will be listed and the total
number is displayed in the result field as shown in Figure 2.1.
(3) The IP Cameras installed within LAN do not share the same subnet with the monitoring PC.
A prompt is displayed with a “Subnet doesn’t match, dbclick to change!” message. Click the
left mouse button to choose the prompt and click the right mouse, choose Network
Configuration to set the IP address of the Camera to the same subnet as the LAN. (Figure 2.5)
You can choose obtain IP from DHCP server or set a static IP for the camera. (Figure 2.4)
NOTE: If you could not find the camera’s IP on the IP camera tool.
Please check if DHCP is enabled on your router, or disable MAC address filter.
Make sure that the firewall doesn’t block the camera.
Six Options
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
6
WWW.FOSCAM.COM FI8608W User Manual
Figure 2.3b
z Network Configuration
This page will allow you to configure the Network parameters.
Figure 2.4
Obtain IP from DHCP server: If checked, the device will obtain IP from DHCP server. In other
words, the camera will have a dynamic IP. (Make sure the Router which the camera connects
has DHCP function and DHCP is enabled).H series can’t obtain IP from DHCP server.
Figure 2.5
IP Address: Fill in the IP address assigned and make sure it is in the same subnet as your
computer or router. (I.e. the first three sections are the same)
Subnet Mask: The default subnet mask of the equipment in our LAN is: 255.255.255.0.You can
find the subnet mask in the basic information of your router or the locally-attached of your PC.
Gateway: Make sure it is in the same subnet with PC’s IP address. The gateway is your router’s
LAN IP.
DNS Server: IP address of your ISP network provider. You can find the DNS server in your
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
8
WWW.FOSCAM.COM FI8608W User Manual
z Flush Arp Buffer
When wired and wireless of the camera both are fixed IP address. You may encounter an issue
with not being able to open the camera webpage. You may try to use flush Arp buffer.
z About IP Camera Tool
Display the version of the IP Camera Tool.
2.2 Camera Login
You can access the camera through the IP Camera Tool or IE, Firefox, Google Chrome,
Safari or other stand browser directly.
1) Double click the IP address of the IP Camera listed (Figure 2.1).The browser you use will be
opened automatically and display the following page. (Figure 2.8)
2) You can also access the camera by IE browser directly by typing in the camera’s IP address
(Figure 2.7). For example:
Figure 2.7
Figure 2.8
Camera supports three-level users management: admin, user and guest.
“user” username and
ou use
The default “admin” username and password are all “admin”, the default
password are all “user”, and the default “guest” username and password are all “guest”.
There are two modes to login. If you use PC to login, please choose the first mode. If y
mobile to login, please choose the second mode. (Figure 2.9)
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
10
WWW.FOSCAM.COM FI8608W User Manual
If you use PC to login, select this login
If you use mobile to login, select this login
Figure 2.9
First time you use the IPCAM, you must download the ActiveX.
If you use IE, you can download ActiveX from the login UI. If you use Firefox, Google Chrome,
safari or others, you should download QuickTime Player as the ActiveX from other website.
For IE
Please click . Install the ActiveX after download.
Figure 2.10
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
11
WWW.FOSCAM.COM FI8608W User Manual
Click next.
Figure 2.11
Click Install.
Figure 2.12
Only click Finish and the computer restarts upon installation completion.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
12
WWW.FOSCAM.COM FI8608W User Manual
The first time you login the UI. You will receive an ActiveX prompt as the picture below. (Figure
2.13)
Figure 2.13
Right click on the active prompt and choose Run Add-on(Figure 2.14).
Figure 2.14
Select Run on the next prompt (Figure 2.15), you will see a live video. (Figure 2.16)
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
13
WWW.FOSCAM.COM FI8608W User Manual
Figure 2.15
Figure 2.16
NOTE: If you could not view living video after running the ActiveX, only a red cross
in the
center of the video or just a black screen. Please change another port number to try.
Make sure all firewall or antivirus software on your computer does not block the active download
and installation. If you are unable to run the ActiveX control, try shutting down the firewall or
antivirus program.
For Firefox, Google Chrome and Safari
Fill in user name and password then login.
It may ask you for user name and password again before login the UI.
After you enter user name and password, you will see the living video.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
14
WWW.FOSCAM.COM FI8608W User Manual
2.4 For Operator
If you click here, the camera will horizontally &
vertically rotate and stop at the center
Figure 2.22
1 Click this icon, camera will rotate up
2 Click this icon, camera will rotate down
3 Click this icon, camera will rotate left
4 Click this icon, camera will rotate right
: Click this icon; camera will rotate up and down. Click to stop.
: Click this icon; camera will rotate left and right. Click to stop.
Preset: You can create preset positions for the camera to go to directly from one position to
another. A total of 8 preset positions can be configured.
Pls follow the steps below to create preset positions:
1 Adjust the shooting area to a desired position.
2 Click set 1 to define your home position.
3 To add additional preset positions, pls repeat step1-2.
When the camera rotates to other position, only choose the preset num you have set and click go,
the camera will go to the desired position.
If you want to delete one position, only reset the num.
Onscreen Mouse Control
You can click on a place on the screen to indicate the camera move direction you prefer. For
example, you can click on the upper-right corner of the screen, and the cameras lens will move
toward the upper-right direction.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
18
WWW.FOSCAM.COM FI8608W User Manual
When the icon has three arrows, the speed of the rotation is fastest. And when the icon has one
arrow, the speed is lowest. But this type of camera dosen’t support this function because the
PTZ speed can not change.
Figure 2.23
Put the mouse at the center of the living video, you will see the icon of the magnifying glass
(Figure 2.24). Press the left mouse and you can use the optical zoom.
Note: The camera doesn’t support this function because the lens without the optical zoom.
Figure 2.24
2.5 For Administrator
Click For Administrator, you will see the Device Information.
It contains Device ID, firmware version of the camera and other status of the camera.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
19
WWW.FOSCAM.COM FI8608W User Manual
Figure 2.26
You can open the stored files and read it.
Format SD card as fat32: Click it and format the SD card.
Unplug SD Card: Click it then unplug SD card safely.
3 How to configure settings in For Administrator
3.1 Date & Time Settings
There are four models for you to adjust time: Manual setting, Sync with computer time, Network
Time Protocol and Keep current time, choose one model and adjust the camera time. Then
choose Time zone.
Manual settings: The administrator can enter the date and time manually. Note that the date
and time format is [yyyy/mm/dd] and [hh:mm:ss].
Network Time Protocol: It is a protocol which synchronizes computer clocks by periodically
querying an NTP server.
Interval: The interval time between last time and next time that the camera adjust time with Ntp
Server.
Time zone:Select the appropriate time zone from the list.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
21
WWW.FOSCAM.COM FI8608W User Manual
Figure 3.1
If your country implements the Daylight Saving Time, when you select the Time zone, you can
see the following screen:
Figure 3.2
The camera will adjust the daylight saving time automatically if you select “Automatically adjust
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
22
WWW.FOSCAM.COM FI8608W User Manual
clock for daylight saving time changes”.
3.2 User Settings
The camera has set up 3-level user permissions, user names are admin, user, guest, and the
default passwords are admin, user, guest too.
Different user has different permission. Only admin can access the For Administrator page. User
cannot access the For Operator page to operate PTZ. Guest only can see the live view
window.
Please reset the passwords at first using and prevent unauthorized users login the camera.
Click Apply to save these settings.
Figure 3.3
Note: You cannot change the user names and all passwords cannot be null.
3.3 Basic Network Settings
IP Configuration Type contains two types: Fixed IP Address and Dynamic IP Address. Set the
appropriate type for you. Keep the camera in the same subnet of your router or computer.
Fixed IP Address: Select this option to manually assign a static IP address to the Network
Camera.
Dynamic IP Address: Select this option to obtain an available dynamic IP address assiged by
the DHCP server each time the camera is connected to the LAN.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
23
WWW.FOSCAM.COM FI8608W User Manual
Figure 3.4
If you want to set a static IP for the camera, you should keep the camera in the same subnet of
your router or computer. The DNS Configuration Type has two types: Manual DNS and From
DHCP Server. If you don’t know the subnet mask, gateway and DNS server, you can check your
computer’s local area connection. It contains all the information.
The step is Control PanelÆNetwork ConnectionsÆDouble click Local Area Connections Æ
Choose GeneralÆProperties. You will see all the information in it.
Click here
Figure 3.5
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
24
WWW.FOSCAM.COM FI8608W User Manual
Set the same subnet
mask and gateway of
your camera with your
PC
There are two DNS servers, you can set the
same for your camera. Same with gateway is
also OK.
Figure 3.6
If you don’t know the DNS server, you can use the same settings as the default Gateway.
HTTP Port number:, The HTTP Port can be used to access the IPCAM on the LAN. Usually, it is
80. You can set any number between 1024 and 49151 too.
After all settings, click Apply. You will see the following picture, click OK, and re-connect the
camera.
Figure 3.7
RTSP port number: Usually, it is 554. You can set any number between 1024 and 49151 too.
Click Apply and the camera will reboot.
Enter rtsp:// IP:RTSP port number/11 or rtsp:// IP:RTSP port number/12 into the VLC, you can
see the real-time preview. WAN IP or LAN IP is OK. If the RTSP port number is 554, you can
directly enter the following url: rtsp:// IP/11 or rtsp://IP/12 . The number “11” shows that you will
use first stream. The number”12” shows that you will use second stream. For example:
Enter rtsp://192.168.11.169/11
in the VLC.
RTSP Permission Checksum
On: Select it and you need to enter the login username and password when you view the
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
25
WWW.FOSCAM.COM FI8608W User Manual
real-time preview in the VLC.
Off: Select it and you do not need to enter the login username and password.
Figure 3.8
Figure 3.9
You need to enter the user name and password if you select on for RTSP Permission Checksum
. Click OK and you can see the real-time preview.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
26
WWW.FOSCAM.COM FI8608W User Manual
Figure 3.13
Make sure your mailbox for sender supports SMTP. Three recipients can be added to receive
images. SMTP port is usually set as 25. If SMTP server supports SSI, you should choose it. The
subject and message can not be chinese characters.
3.7 FTP Settings
If you want to upload images to your FTP server, you can set FTP Settings.
Figure 3.14
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
29
WWW.FOSCAM.COM FI8608W User Manual
Figure 3.15
FTP server: If your FTP server is set up in LAN, you can set as Figure 3.14
If you have a FTP server which you can access on the internet, you can set as Figure 3.15
FTP Port: Usually the port is 21
If the FTP server mode is passive, choose on, or else, choose off.
Path: The path of FTP that you plan to store images.
Click Apply after settings.
3.8 Auto Capture
The camera will capture pictures automatically at interval time if you have set Auto Capture.
Figure 3.16
Snap interval: Set snap interval time. The pictures will be stored to the disk you have set (you
can set the storage path under “For Visitor”).
Send E-mail: Select it, the camera will send email to you with the picture it has captured.
Save Picture on the SD card: Select it and the snapped pictures will be stored to the SD Card.
Make sure the camera has plugged in the SD card.
Click Apply after settings.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
30
WWW.FOSCAM.COM FI8608W User Manual
3.9 Motion Detection
If the user wants to monitor a special region, he should select motion detection.
IPCAM supports four detection regions. Choose the options dialog box before window1,
window2, window3, window4 to enable the corresponding areas. For example, choose
window1.Then you can see a box with a number at living video (Figure 3.17).
Figure 3.17
Move your mouse on the regional box, you can drag the regional box to any position in the video.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
31
WWW.FOSCAM.COM FI8608W User Manual
Figure 3.18
Move the mouse to the bottom right corner of the regional box .When the mouse pattern changes
to “ ”, you can change the size of the detection area.
Drag it and change the size of
the alarm area
Figure 3.19
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
32
WWW.FOSCAM.COM FI8608W User Manual
Bit rate: Generally speaking, the larger the bit rate is, the clearer video will become. But the bit
rate configuration should combine well with the network bandwidth. When the bandwidth is very
narrow, and bit rate is large, that will lead to video can not play well.
Maximum frame rate: Note that a larger frame size takes up more bandwidth. When the video
format is 50Hz, the maximum frame rate is 25 fps. When the video format is 60Hz, the maximum
frame rate is 30 fps. You should lower frame rate when the bandwidth is limited. Normally, when
the frame rate above 15, you can achieve fluently video.
Key Frame Interval: The time between last key frame and next key frame.
Bit rate control: It has two models: CBR and VBR. If you choose CVR, video encoder will be
coding on the basis of bit rate you set. If you choose VBR, video encoder will be coding not only
on the basis of bit rate, but also consider video quality.
Parenthesis options: Select this option to add name and time to the live view stream. If you set
as following picture (Figure 3.24), you will see the video as Figure3.25. The video name cannot
be chinese characters.
Figure 3.24
Figure 3.25
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
37
WWW.FOSCAM.COM FI8608W User Manual
3.14 Audio Settings
Figure 3.27
Audio capture
On: Add audio signal when coding. Choose it and the audio will be better.
Off: Not add audio signal when coding.
You can choose whether open audio capture for first stream or second stream.
Audio type
It has two types: G711 and G726.You can choose any one.
Note: If you use Firefox, Google Chrome, Safari, you must choose G711.Because the ActiveX
doesn’t support G726.
Audio input
MIC: If the audio input interface of the camera has connected with microphone, here you should
choose MIC.
Line in: If the audio input interface of the camera has connected with linear audio input signal
device, here you should choose Line in.
Which one you choose is decided by the device that connect with audio input interface.
Click Apply, you can see a dialog box as below:
Figure 3.28
Click OK to reboot camera.
If you give up the settings you have done, click cancel to restore the status before your settings.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
39
Back to the “For Visitor” and click the icon , you can here the voice around the camera.
WWW.FOSCAM.COM FI8608W User Manual
Figure 5.1
If you allow the ActiveX running, but still could not see living video. Please change another port
number to try. Don’t use port 80, use any port between 1024 and 49151.
Figure5.2
NOTE: Make sure that your firewall or anti-virus software does not block the camera or ActiveX.
If you could not see video, please shut down firewall or anti-virus software to try again.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
42
WWW.FOSCAM.COM FI8608W User Manual
5.1.4 I cannot see the video on Firefox or Safari or Google chrome?
For Firefox, Safari and Google chrome, you should install Quick Time Player as the ActiveX
controller, please configure the activex controller as the following picture:
Select Preferences—QuickTime Preferences…
Figure 5.3
Choose HTTP as the transport protocol.
Figure 5.4
Choose Automatic as the transport setup, then click OK to save the settings.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
43
WWW.FOSCAM.COM FI8608W User Manual
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
45
5.2 Default Parameters
Default network Parameters
IP address: obtain dynamically
Subnet mask: obtain dynamically
Gateway: obtain dynamically
DDNS: Disabled
Username and password
Default admin username: admin Default password: admin
Default user username: user Default password: user
Default guest username: guest Default password: guest
5.3 Specifications
ITEMS FI8608W
Image Sensor 1/4"Color CMOS Sensor
Display Resolution 640 x 480 Pixels(300k Pixels)
Lens f: 3.6mm, F:2.4 (IR Lens)
Image Sensor
Mini. Illumination 0.5Lux
Image Compression H.264
Resolution
VGA640*480),QVGA320*240),QQVGA160*120
View H.264 dual streaming
Image adjust The brightness, contrast, saturation , is adjustable
White balance Automatic, Indoor, outdoor , is adjustable
Infrared mode Automatic , manual (on/off)
Light Frequency 50Hz, 60Hz
Night visibility
Φ5mm 11 IR LEDs, Night visibility up to 8 meters
Video
Pan/Tilt Angle Horizontal:300° & Vertical: 120°
Input/Output Linear Input/Output, which can realize two-way voice the
intercom
Audio
Audio Compression G.711/G.726, Audio sampling Bit rate 128kbps ~ 2.048Mbps
Ethernet One 10/100Mbps RJ-45
Supported Protocol
TCP/IPUDP/IPHTTPSMTPFTPDHCPDDNSUPNP
Wireless Standard WIFI(IEEE802.11b/g/n)
Network
Support IP address static IP address, dynamic IP address
Power Supply DC 5V/2.0A (EU,US,AU adapter or other types optional)
Power
Power Consumption 8Watts (Max.)
Alarm detection The motion detecting, detection threshold Settings
Alarm
Alarm inform
Support EmailFTP etc alarm inform way
SD CARD SD CARD (Support to 32G)
Hardware
Interface
Audio Input/Output
Interface
One audio input jack, One audio output jack.
47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Foscam FI8608W wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Foscam FI8608W

Foscam FI8608W Installationsanweisung - Englisch - 16 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info