Bedienungsanleitung Foscam FI8909 NA (Seite 21 von 29) (Französisch)

548566

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

IPCAM User Manual

- 19 -

Figure 3.4

Access the IP Camera from the Internet

User can access the IP Camera from the Internet,Enter WAN IP address + port number in the IE to

access IP Camera.For example, Http:// 116.25.51.115:85

Note: Make sure the Port mapping is success.You can do port mapping by two ways:

 Enter setting page of the router which ipcamera connect with to enable UPNP function.Enter

ipcamera “Upnp Settings” to enable UPNP and make sure the state is “Upnp success”.

 If your router has the Virtual Map function.Enter router setting page,add ipcamera‟s IP and

port to the Virtual map list.

3.6 How to use DDNS

When use ADSL, the IP Camera will connect to the Internet through ADSL automatically. For each

ADSL reconnection,ISP will re-assign a new IP address for the IP Camera to facilitate the access.

DDNS(Dynamic Domain Name Server) can map the dynamic IP address of an IP Camera to a fixed

domain name.Therefore,we can access the IP Camera by the fixed domain name whether the IP

address changes or not. The IP address is not necessary when you using the DDNS via the domain

name to find your network.

1) Go to the website which Provides free domain name,register and apply a free domain name. such

as http://www.dyndns.com/(details:4.1.6 ).

2) login the Camera homepage as Administration and enter”DDNS Service Settings”page input the

name, password and Host(details: 2.5.3) .Then click <SUBMIT> and reboot Device.

3) Re-login the Camera homepage and enter”DDNS Service Settings”page to check the DDNS

Status is DynDns Succeed or not.

4) Enter”UPnP Settings”page,the UPnP Status should be UPnP Succeed.If the status is not

Succeed,you may enter “Basic Network Settings” page to change Http Port (details: 2.5.2). Then

click <SUBMIT> and reboot Device.

5) Re-login the Camera homepage to check and make sure the DDNS Status and UPnP Status is

Succeed.

6) You only need to enter the domain name(domain name+Port number http://ipcam.kicks-ass.net:81/)

in the IE address bar ,the browser will visit the IP Camera.

Wait for several minutes and the IP Camera will dial up to access the Internet automatically, and the

communication with the DDNS server is established successfully. In the way, the user can access the

IP Camera from a WAN by using the DDNS domain name.

If the gateway settings and DDNS settings have been completed,ener the DDNS dynamic domain

name(for example,http://ipcam.vicp.net/,do not add www.) in the address bar of the IE to access the IP

Camera.If multiple IP Cameras are connected to the same router,enter DDNS dynamic domain + port

number(for example, http://ipcam.vicp.net:85/) in the address bar of the IE to access different IP

Cameras.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Foscam FI8909 NA Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Foscam FI8909 NA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info