There are four alarm indicators:
A Camera Sound and PC Sound
if you select Camera Sound or PC Sound, when the motion has been detected, the people around the camera
will hear beep alarm sound.
B Send E-mail
If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail
Settings first.
C Take Snapshot
If you select this checkbox, when the motion has been detected, the camera will snap the live view window as
a still picture and load it to the FTP or SD card.
Make sure you have set the storage path in Video->Snapshot settings panel.
Time interval: The interval time between two pictures.
D Recording
If you select this checkbox, when the motion has been detected, the camera will record automatically and store
the record files.
Make sure you have set the Alarm record files storage path, please go to Record—> Storage location page
to verify this settings.The default alarm record time is 30s and pre-alarm record time is 5s, please go to
Record—> Alarm Record page and change the alarm time settings.
E IO Output
If IO alarm is triggered and IO alarm output device will always alarm (sound alarm is issued a warning sound,
alarm lights in flash etc.). Click "Clear IO alarm output" , the alarm output device will stop alarming. If IO alarm
is triggered again after alarm interval, IO alarm output device will be restart.
