Bedienungsanleitung Foscam FR305 - N300 (Seite 58 von 59) (Englisch)

602510

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

Wireless N300 High power Router

Appendix 2 FAQs

This section provides solutions to problems that may occur during installation and operation of the device. If your problem is not covered here,

please feel free to go to www.foscam.us to find a solution or email your problems to: support@foscam.us. We will be more than happy to help you

out as soon as possible.

1. Q: I entered the device’s LAN IP address in the web browser but cannot access the utility. What should I do?

a.Check whether device is functioning correctly. The SYS LED should blink a few seconds after device is powered up. If it does not light up,

then some internal faults may have occurred.

b.Verify physical connectivity by checking whether a corresponding port’s link LED lights up. If not, try a different cable. Note that an

illuminated light does NOT ALWAYS indicate successful connectivity.

c. Run the "ping 192.168.0.1" command. If you get replies from 192.168.0.1, open your browser and verify that Proxy server is disabled. In

case that ping fails, press and hold the "WPS/RST" button on your device for over 7 seconds to restore factory default settings, and then run

"ping192.168.0.1" again.

d. Contact our technical support for help if the problem still exists after you tried all the above.

2. Q: What should I do if I forget the login password to my device?

Reset your device by pressing the WPS/RST button for over 7 seconds.

Note:

All settings will be deleted and restored to factory defaults once you pressed the WPS/RST button.

3. Q: My computer shows an IP address conflict error after having connected to the device. What should I do?

a.Check if there are other DHCP servers present in your LAN. If there are other DHCP servers except your router, disable them

immediately.

b.The default IP address of the device is 192.168.0.1; make sure this address is not used by another PC or device. In case that two

computers or devices share the same IP addresses, change either to a different address.

4.Q: I cannot access Internet and send/receive emails; what should I do?

This problem mainly happens to users who use the PPPoE or Dynamic IP Internet connection type. You need to change the MTU size (1492

by default). In this case, go to “Internet Connection Setup” to change the MTU value from default 1480 to 1450 or 1400, etc.

5. Q: How do I share resources on my computer with users on the Internet through the device?

To let Internet users access internal servers on your LAN such as e-mail server, Web, FTP, via the device, use the " Port Range Forwarding r"

feature. To do so, follow steps below:

Step 1: Create your internal server, make sure the LAN users can access these servers and you need to know related service ports, for

example, port number for Web server is 80; FTP is 21; SMTP is 25 and POP3 is 110.

Step 2: Enter Port Range Forwarding screen from device web UI.

Step 3: Complete the Start Port (also called External/Ext Port on some products) and End Port (also known as Internal Port on some

products) fields, say, 80-80.

Step 4: Input the internal server’s IP address. For example, assuming that your Web server’s IP address is 192.168. 0.10, then simply input it.

Step 5: Select a proper protocol type: TCP, UDP, or Both depending on which protocol(s) your internal host is using.

Step 6: Click Enable and save your settings.

For your reference, we collected a list of some well-known service ports as follows:

Server

Protocol

Service Port

Web Server

TCP

FTP Server

TCP

Telnet

TCP

Net Meeting

TCP

1503、1720

MSN Messenger

TCP/UDP

File Send:6891-6900(TCP)

Voice:1863, 6901(TCP)

Voice:1863, 5190(UDP)

PPTP VPN

TCP

1723

Iphone5.0

TCP

22555

SMTP

TCP

POP3

TCP

110

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Foscam FR305 - N300 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info