784024

Foscam VD1 Anleitung

1
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
V1.1
305503000600
Support email: support@foscam.com
Quick Setup Guide
Video Doorbell
Physical Description
Camera Micro SD Card Slot
Reset
Light sensor
Microphone
Front Panel Rear Panel
Doorbell button
Power Input Port
Type-C Port
Mounting slots
Speaker
Bottom Panel
Security screw hole
2
Add Device: Connection via the Foscam
App (Recommended)
It is strongly recommended that you complete the "add devices"
process on the Foscam app before the doorbell hardware is installed.
To ensure a smoother video experience on your smart phone, it is recommended that your smart
phone meet the following specications:
iOS: version 11 or higher.
Android: 4.1 or higher, using a device with a Graphics Processing
Unit (GPU).
Before You Get Started
Scan the QR code below to download and install the Foscam APP, and learn how to add the
doorbell to the APP.
Note: For the best experience, please update the APP to the latest version! 3
1. Plug the smaller end of the USB cable into the Type-C port on the back of the Video Doorbell,
and the larger end into a USB wall charger such as your smartphone charger (DC5V 1.0A power
output recommended for faster charging). Please wait for a few seconds until you hear “Ready
for WiFi conguration”.
WiFi connection
Conrm
WiFi connection
WiFi
2. Make sure that your smart phone is connected to your WiFi router.
Foscam_1
Foscam_2
xxxxx_2.4G
xxxxx_5G
Tips: If you didn’t hear the voice prompt, press and hold reset for about 10 seconds to reset the
camera.
Please note that it is forbidden to connect the doorbell to AC and Type -C power
supply at the same time.
4
Tips: The camera supports dual-band 2.4GHz and 5GHz WiFi networks, so you can choose the
channel with the stronger signal to use. For example, choose your SSID: XXXXX_2.4G or XXXXX_5G.
3. Open the foscam APP and please sign up for a Foscam account, or sign in if you have one already.
4. After logging into Foscam APP, select “Tap to add a camera” or "+" icon on the upper right
corner, then select "Scan the QR code" and scan the QR code that labeled at the bottom of your
camera.
Scan the QR code, located at
the bottom of your camera
Tap + icon Select ”Scan the QR code”
Tap to add a camera
Add Device
<
Scan the QR code
Search in LAN
Manually add
Scan QR Code
<
Model: XXX
MAC ID:000000000000
Username(default):admin
Password(default):(blank)
DDNS:XXXXXX.
myfoscam.org
FCC ID:XXXXX
IC:12558A-XX
S/N:FIAI1403000001
UID:XXXXXXXXXXX
FHD Wireless IP Camera
5. In “Add Device”, if you hear "Hello Foscam", select the checkbox and tap ”Next”, continue to
conrm that the device is in the blue ashing state and tap ”Next”. In “WiFi connection”, enter
your WiFi's password and tap "Conrm" (see illustrations on next page).
5
Heard "Hello Foscam"
and tap "Next"
Conrm
device
ashes blue
I have heard “Hello Foscam”
Add Device
Next
Power the device on until
the device voice prompts
"Hello foscam"
<
Device flashes blue
Add Device
Next
Conrm that the device is
in the blue ashing state
Enter your WiFi's password
and tap "Conrm"
Wi-Fi connection
The device will added by scanning the QR
code and sound waves.
Foscam_2.4G
<
2.4GHz / 5.0GHz
WiFi Password
Conrm
6. Please scan the QR code on the doorbell with the smartphone camera, then you will hear a
voice prompt say ”WiFi connecting”. Select the checkbox and tap ”Next”.
Place the QR code directly
in front of the camera
For WiFi configuration, please point the
QR code to the camera directly.
WiFi connection
<
I have heard the voice prompt
“WiFi connecting”
Next
Tick the checkbox and tap “Next”
10~15cm
3.94~5.9in
Tips: Please place the QR code on the phone screen about 10 to 15cm (3.94 to 5.9in) away, and if
you encounter diculties you can try to move the screen slowly around 10 – 15cm (3.94 - 5.9in).
6
13
12
Remove the existing doorbell button near the front door. Pull the two wires out carefully when
removing the old doorbell. Straighten the wire ends if necessary.
What's required: Dual-purpose screwdriver
Dual-purpose screwdriver
(Phillips screwdriver side)
Step 4
11
After removing the cover of the mechanical chime or digital chime, use the wire connection
terminal with the Power Kit as pictured. After wiring is completed, replace the cover.
You can scan the QR code below to search and watch the power kit installation video.
9
Video Doorbell Installation
Note:
1. Make sure you have installed the Foscam App, and have scanned the doorbell QR code and
completed the "add device" process in the app before beginning the hardware installation
process.
2. If you choose to use AC power to power the video doorbell, you need to ensure that the
specication of the transformer in your home is 8V~24V AC, the minimum power requirement
is 8VA.
3. If you use DC power to power the video doorbell, you need to prepare a DC12V~30V power
adapter, the minimum power requirement is 6W.
4. If you use Type-C interface to power the video doorbell, you need to prepare a DC5/1A power
adapter, the minimum power requirement is 5W.
Step 1
Ring the existing doorbell, make sure it’s working and locate the place of your existing chimes in
the house.
Step 2
Shut o the master circuit breaker in your house. Turn the lights in your home on / o to make
sure the electricity in your house is properly shut o.
OFF
If you're not comfortable doing it yourself, consult a qualied electrician.
8
Note: If the process of adding a camera fails, please reset your camera and try adding again
according to the above method.
Camera added successfully
and the name has been set
7. Wait a few seconds until the camera noties you that the “Wireless connection succeeded”,
which means your camera has connected to your WiFi successfully. After, you can set the
camera name and tap “Save” in "Set name" interface.
Reset
Set name
Save
Camera added successfully
Please set the camera name:
My Camera
<
Device white light flashes
Add Device
Next
The Wi-Fi conguration is
complete, and the white
light of the device ashes
Conrm device white light ashes
7
10
YouTube
Step 3
Indoor chimes are generally of two types: mechanical, or digital. If you need to use the existing
mechanical chime or digital chime in your home, please install the Power Kit in parallel to the
chime. Power Kit is generally used to solve the problem of abnormal ringing of the chime after the
video doorbell replaces the traditional doorbell buttons.
How to distinguish between Digital Chime and mechanical Chime, please scan the following QR
code to view.
What's required: Dual-purpose screwdriver
Dual-purpose screwdriver
(Phillips screwdriver side)
YouTube
10. After completing the above steps, you can begin installing your camera.
9. Tapping on the play button in the video box will jump to the “Camera Login” setting interface.
For your security, please set a new username and password for your camera before viewing live
video.
Set a new username and password
Camera Login
New camera username
Re-enter new camera
password
New camera password
Tap “ ”
Foscam_camera
On
Submit
8. In “Select Chime Type”, tap ”Select Chime Type”, and tap ”Next”. In “Select Chime Type”, Select
Chime Type and tap "Mechanical chime" or "Digital chime" or "None" (Please select the type of
your existing chime).
Tap Select Chime Type
Select Chime Type
Select Chime Type
The video doorbell can work
with your existing Mechanical
chime or Digital chime. Please
select the type of your existing
chime after watching the video
with a description on this
subject.
Mechanical chime
Select Chime Type
Mechanica Chimel Digtal Chimel
OR
Digital chime
None
Select the type of
your existing chime
Note: Please carefully conrm the existing chime type in your home. If the chime type is selected
incorrectly, the transformer and chime at home will be damaged, causing the doorbell and chime
to not work properly. Generally, a mechanical chime refers to the ringing sound made by striking a
metal with a metal striker, while digital chime refers to the ringing sound made by playing music
through a speaker.
If you are still not sure, please watch the chime type description video carefully, or consult our
customer service sta.
Bypass Model: If you don’t want to use the existing chime, you can switch the cable on the Power
kit to the bypass interface, and then connect it in parallel to the existing chime. This will
short-circuit the chime at your home. You can choose to add WiFi chime,realize the function
of chime. If you choose to use the Power Kit by pass mode, be sure to set the chime type to
"None" in your APP to avoid damaging the transformer.
14
15
FRONT
TRANS
REAR
Remove the cover
Replace the cover
Bypass Mode
Bypass Mode
Bypass Mode
APP add doorbell
instruction video
YouTube
Download the
Foscam APP
1
What’s in the Box
1 x
Type-c cable
1 x 5° Vertical angle bracket
1 x 15° Horizontal angle bracket
1 x
Power Kit
1 x Video Doorbell
1 x Mounting bracket
2 x
Wire Nuts
1 x
Silicone Plug
1 x
Dual-purpose screwdriver
1 x
Drill Hole
Position Template
1 x Thick mounting bracket
2 x
Wire Extenders
1 x Quick Setup Guide
1 x
Expansion Screws
Quick Setup Guide
Video Doorbell
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Foscam VD1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info