628407
4
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
4
SAFETY WARNINGS
The system must be installed by qualified operators in compliance with current national and local
safety laws.
Installation warnings
In compliance with European Directive 2004/108/EC (EMC), the system must be installed using
devices, cables and accessories that comply with the requisites established by the Directive for
permanent installations.
The product installation must be carried out in accordance with the provided installation instructions
to preserve the operator from any accidents and the product from damaging.
Important: Only trained and authorised personnel are allowed to work on the system for the con-
nections as described in the instruction manual. In case of a malfunction, do not attempt to repair
the product as it would render the guarantee invalid.
It is advisable to periodically check that the alarm system is in perfect working order; however, a
reliable electronic alarm system does not prevent intrusion, theft, fire or other events but helps to
reduce the risk of them occurring.
Conformity with european directives
Fracarro Radioindustrie SpA declares that the system conforms to the essential requirements and
other provisions provided by European directive 2004/108/EC (EMC) and CEI EN 50130 4, CEI EN
61000 6 3, CEI EN 60950 regulations.
Electric safety warnings
- The building’s electrical installation must fit a suitable magneto-thermal switch to protect
from surges and short circuits.
- The building’s electrical installation must fit a suitable omnipolar switch. The switch must
be easy to access and have a separation from the contacts of at least 3 mm.
The unipolar sectioning device can be used to section the phase conductor if you are
certain of having identified the neutral conductor.
- The connection conductors to the power supply network and the internal harness must be
fixed with clamps or similar fixing items.
- Fuse identification:
Fuse F300: F 3.15A.
1. DESCRIPTION OF THE FEATURES
This chapter lists the main hardware and functional features of the CE2N-416 unit and the different
elements and accessories that complete it.
Main features
- The control unit lines can be expanded to 4 with a M4IBUS module or to 8 with a
M8IBUS module.
- Integrated software filter to detect fast alarms (for vibration or wire sensors).
- 7 outputs in the control unit.
- 4 programmable partitions.
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fracarro CE2N-416 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info