Bedienungsanleitung Fracarro CE2N-416 (Seite 37 von 48) (Englisch)

628407

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

ATTENTION: if a line is excluded manually or it is being TESTED and the system is

COMPLETELY ARMED, the CHBUS reader will show the LED permanently green (all armed),

the keypad will display the zone/s excluded, even if the system is completely armed, and it will

display the words “CENTRALE PARTE INSERITA”. The event log will record the exclusion of the

zone/s and, if the system is completely armed with one excluded zone, the words “TOTAL

ACTIVATION” will be displayed.

- Output function test. The CE2N-416 control unit allows for the testing of all alarm outputs

on the card by activating each of them for about 3 seconds.

- Walk test. The control unit allows you to quickly and efﬁciently check the correct operation

of the sensors and modules.

Place the control unit in “line walk test” mode and activate the sensors that you want to

control. The keypad buzzer will generate a tone every time that the sensor is activated and the

activation will be recorded on the display.

Press the key no. 5 on the keypad to reset the alarm.

- Walk test Tamper. The control unit allows you to quickly and efﬁciently check the proper

operation of the anti-tampering sensors. Place the control unit in “walk test tamper” mode and

open the cases of the sensors that you want to control. The keypad buzzer will generate a

tone every time that the contact is activated and the activation will be recorded on the display.

Press the key no. 5 on the keypad to reset the alarm.

- Channel test. The control unit allows you to test the telephone alarm channel and the

correct dispatch of the vocal and/or digital signals to a speciﬁc number.

The call is sent without generating any effective alarm.

- DTMF reception test. The control unit can test the DTMF tone reception.

This test allows you to understand if the CE2N-416 control unit recognizes the DTMF tones

sent by a phone line from a telephone.

Select an active channel and an associated phone number; press V to call.

• Answeringtheincomingcall

• NOmessageisheard

• Pressthevariousdigits1,2,3,4,5,6,7,8,9,0,*,#fromthePHONEkeypad

• FromthedisplayoftheT8Nand/orT8N-Lightkeypads,thesameguresthatarepressed

on the phone will appear in the same sequence.

If the numbers don’t appear, modify the sensitivity of the telephone from the menu

Dialler  control unit phone options  reception gain

If the problem is not solved, check th–e connection and/or check the signal quality

of the incoming phone line.

8.7 Exclusions

With the CE2N-416 unit, it is possible to exclude some of the control unit’s functional elements,

such as lines or outputs for eliminating possible malfunctioning. The control unit ignores an

excluded component; therefore, it is possible to neither receive alarms from an excluded line nor

activate the excluded outputs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fracarro CE2N-416 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info