628403
7
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
7
OSD MANAGEMENT
Advanced settings are available by joystick on the cable
Up
Move up / increase values
Down
Move down / decrease values
Left
Open sub-menu
Right
Close sub-menu
Enter
Enter menu and confirm selection
Setup item Description
LENS
Manual Lens & Auto Iris Lens Setting
MANUAL
This function is for normal lens or vari-focal lens like this camera serie.
AUTO
System automatically adjusts the iris level to control the brightness. This function is valid only for Auto Iris lens and
not available with this camera series.
SHUTTER / AGC
Shutter speed & AGC setting, it determines the image brightness under low lux or bright condition
AUTO
Mode and brightness setting of the HIGH / LOW LUMINANCE
MANUAL
Parameter of the mode, shutter and AGC
WHITE BAL
White balance mode setting, it determines the way the color is produced
ANTI CR
Color Rolling suppress
MANUAL
Manually adjust the white balance
PUSH LOCK
Press OSD ENTER button to lock the current white balance, once it is locked, the white balance will not operate even
when light temperature is changed.
ATW
Auto Trace White
PUSH
Similar to ATW, but system will force to track white balance continuously
USER1
User define white balance #1
USER2
User define white balance #2
BACKLIGHT
Backlight setting
OFF
Default Setting
BLC
Back light compensation
HLC
High light compensation
PICT ADJUST
Basic image adjustment such as hue, saturation, contrast, sharpness
MIRROR
ON/OFF, Flip image horizontally
BRIGHTNESS
0-255, Brightness (Default: 0)
CONTRAST
0-255, Contrast (Default: 128)
SHARPNESS
0-255, Sharpness (Default: 128)
HUE
0-255, Color Hue (Default: 102 for NTSC, 108 for PAL)
GAIN
0-255, Color Saturation (Default: 128)
ATR
Adaptive tone reproduction, software WD setting
MOTION DET
Motion detect function, sense area, sensitivity setting
PRIVACY
Privacy mask, color, transparency setting
DAY / NIGHT
Color / Mono / Auto Mode setting
AUTO
Auto Mode
COLOR
Color mode
B/W
Black and White mode
NR
Noise Reduction setting
NR MODE
Noise reduction mode adjustment
Y LEVEL
Luminance noise reduction (Default: 4)
C LEVEL
Color noise reduction (Default: 4)
CAMERA ID
Camera ID Setting
CHR1/CHR2
Default characters and User define characters (maximum of 40)
←→↑↓
Move the location of the cursors
CLR
Clear the highlight character & move to next character
POS
Use OSD UP/DOWN/LEFT/RIGHT button to adjust the ID locations
LANGUAGE
OSD Language Setting, total of 8 languages available
CAMERA RESET
Reset OSD setting
EXIT
Leave OSD Menu
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Fracarro CIR700-922 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info