Bedienungsanleitung Frama Matrix F4 (Seite 3 von 64) (Englisch)

581180

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Frama Matrix F4 / F6

General information / safety precautions

Thank you for deciding in favour of purchasing the innovative franking system Frama F4 or Frama Matrix F6.

The following information in this operating guide is intended as support when you install and operate your Frama

Matrix franking system. It also shows how you can easily make settings yourself. With this in mind, please first read

this guide before you put your franking system into service.

Modem approval

In accordance with the Commission Decision 1999/303/EC, this unit has been approved throughout Europe for con-

nection as single terminal equipment to the public telephone network. In view of the differences existing between the

public telephone networks of various countries, this approval in itself does not provide an absolute guarantee of

proper functioning of the unit at every network terminal point.

If any problems arise during operation, please first contact your supplier or maintenance provider.

Safety precautions / accident prevention

1. Read the operating guide completely and adhere to the instructions in it.

2. Before starting the franking machine the first time, it must be properly registered with the post office. When

doing so, keep to the instructions given by your local Frama sales organization.

Each franking mark may be used only once. The Post Office regards repeated use as a punishable offence and a

violation of the general terms and conditions of business.

4. Test franking marks or sample franking impressions are not regarded as valid by the Post Office and items

bearing them may not, therefore, be mailed.

5. Inkjet cassettes and similar printing consumables must be regularly renewed and / or serviced to ensure high-

quality printing.

6. The use of fibrous and other unsuitable envelopes can result in blurred or smeared marks and thus to illegibility

of the franking mark. In view of this, the use of envelopes of this kind cannot be agreed to.

In buildings in which the franking system is plugged into the power supply network a current overload protector

must be fitted.

Before installing the system, check the cable (supply cord) and plug. Have damage repaired only by an elctrical

specialist.

9. Insert the plug into a mains socket only when the franking machine housing is closed.

10. Always run the mains cable (power cord) away at the back of the franking machine and make sure that no risk

exists of it being damaged or someone tripping over it.

11. Never pull the plug out of the socket by the mains cable (power cord).

12.

Never hold any foreign objects in the printing unit (risk of damage).

13.

Never put your hand into the printing unit. Your fingers could be injured if the franking machine is switched on.

Be careful if you are wearing long hair, a tie, etc.

14. Please remove the inkjet cassette if you have to transport the franking system somewhere.

15. Keep children away from the franking system.

16. Have franking machine repairs carried out only by a technician from your local Frama sales organization. Never

open the franking system yourself under any circumstances.

17. Always pull out the mains plug before opening the housing.

18. Never put any hot objects (cigarettes, etc.) onto the housing. Make sure that no moisture can infiltrate into the

machine or the power supply unit.

19.

Avoid using aggressive cleaning agents or detergents when cleaning the franking system. Instead, use a slightly

damp cleaning cloth.

20.

Keep fingers and other parts of the body as well as ties, necklaces, bracelets, long hair and open sleeves away

from the feed entry section. There is a risk of injury from moving parts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Frama Matrix F4 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Frama Matrix F4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info