Bedienungsanleitung Freerider Companion FR168-3A2 (Seite 20 von 40) (Englisch)

665066

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

HOW TO RE-ASSEMBLE YOUR COMPANION.

Your Companion is very easy to re-assemble once you reach

your destination. To re-assemble, follow the preceding

procedure in reverse order, noting the following.

1. When re-assembling the front and rear sections of your

Companion, make certain you are on firm, level ground.

Place the front and rear chassis units close together with the

round tube of the front steering section facing the ‘U’

shaped channel of the rear motive unit (see fig 29, page 19)

2. Pivot the rear chassis unit backwards onto the anti-tipping

wheels and pull down the central support leg (fig 31),

lower the rear chassis onto the support leg.

Warning: Do not pivot the rear chassis backwards onto the

plastic body cover, failure to observe this warning will damage

the paint finish.

3. With the aid of the front wheel ‘C’ arch (located behind

the front wheel) and the rear ‘C’ shape handle (located at

the rear of the front steering platform), lift the front

platform and locate it onto the ‘Unshaped channel of the

rear powered unit (fig 32).

4. Lock the two chassis sections together by pushing forward

on the seat mounting post, this allows the rear support leg

to pivot upwards under spring pressure and the two

chassis sections lock together. You will note the locking

mechanism knob moves up and down during this

operation with an audible “click”.

Warning: Keep hands clear of any ‘pinch’ points during this

operation. Failure to observe this warning could put you into

a dangerous situation.

5. The front and rear chassis parts can now be fully locked

together by rotating the locking mechanism (see fig 27,

page 19) in a clockwise direction indicated by the

“tighten” arrow. Fully tighten the locking mechanism

(approximately four full turns) until the locking pin is fully

located. Pull backwards and forwards on the seat

mounting post to determine that the two chassis parts are

correctly located together, no movement in the two chassis

parts should be found.

Warning: Failure to fully engage the safety pin mechanism

correctly could result in an accident, please take particular care.

6. Connect the white six pin electrical plug together

(see fig 26, page 19). DO NOT FORCE TOGETHER, you

may have connected it the wrong way round.

7. Replace the two batteries onto the chassis making certain

they are correctly located onto the velcro® fastener.

Replace the two battery plugs into their connectors

(see fig 23 page 18).

8. Replace the black battery cover by locating the four lugs

inside the body covers.

9. Remove the handlebar locking pin (see fig 28 page 19)

and replace it into it’s storage location.

10. Replace your seat by following the instructions on page 6

and 7 of this manual.

When you have re-assembled your Companion, switch the

power key to the ‘on’ position. The battery level gauge will

move and the ‘green’ status light will illuminate. This will

indicate that you have re-connected the battery connectors

correctly. If the battery level indicator and status light do not

illuminate then you have not connected the wiring connectors

correctly (see fig 23 page 18 and fig 26 page 19).

Test the drive function of your machine. Does your

Companion move forwards and backwards correctly? If

your Scooter does not drive, the freewheel lever may be in

the ‘disengaged’ position, see section ‘Freewheeling your

Companion’ page 9 in this manual.

Important notice: Your Freerider has been designed for

pavement use only, IT IS NOT A DIRECT REPLACEMENT

FOR A SEAT IN A MOVING VEHICLE.

Now enjoy your Freerider

RE-ASSEMBLING YOUR COMPANION

FIG 31

FIG 32

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Freerider Companion FR168-3A2 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info