Bedienungsanleitung Freerider FR510DXs2b (Seite 8 von 48) (Englisch)

664127

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

1. Remove your seat from the Scooter by lifting the seat

locking lever and lifting the seat clear of the vehicle (see

Fig 1). Note :your seat can only for safety reasons be

removed when it is Turned 90 to the right or left from

the straight ahead driving position. Please take care

when lifting heavy weights. Place your seat on a soft

clean work area.

2. With the aid of a 17mm spanner (not supplied) loosen

the 10mm seat clamp fixing bolt (see Fig 6).

3. Remove the 10mm fixing bolt and reposition the bolt

into one of the four preferred location holes of the seat

mounting tube (see Fig 6).

4. Re-tighten the 10mm fixing bolt. Refit the seat onto

your Scooter. Do not have the

seat set too high, you must be able to place both feet

firmly on the Scooter's floor area. Stability will be

reduced the higher your seat is set on the mounting

tube. Always take great care when cornering, lean

into the corner to achieve the best stability from your

Scooter.

For a comfortable driving

position the backrest of your seat can be adjusted to

one of the four fixed positions by moving the stop bolt

located in each side hinge bracket(see fig 7).The left

hinge bracket is marked 90 ,100 ,105 and 120 with

corresponding hole positions. With the aid of a 4mm

hexagon key and a9mm spanner(not provided)remove

and reposition the stop bolt from each of the two hinge

brackets, into the appropriate angled position. Retighten

each bolt and locknut making certain the two bolts are

located in exactly the same position on either side.

Both stop bolts must be positioned in the same

position for the backrest to be fully supported, failure to

observe this warning may distort the backrest frame.

The rearward stability of your scooter will be

reduced the greater the backrest is set past 90 .Always

Seat Slide Adjustment:

Freerider

5. Seat Height Adjustment:

Freerider

(Fig 4).Located on the right front

side of the seat. This lever allows you to adjust your seat

forwards and backwards when sitting on the seat. Simply

pull up the lever and move in the desired position

backwards by pushing or forward by hitching. As soon as

the lever is released, the seat will lock into the new

position.

Test that the seat has fully locked by hitching

backwards and forwards.

Do not carry out this operation when your

Scooter is moving ,first stop apply the brakes and then

carry out the seat positioning.

The seat as fitted to your Scooter, has a fold

down backrest(see Fig 5).The seat has two height positions.

Your distributor will position the seat to allow you

the most comfortable driving position.

You may need to alter the seat

height setting at a later date, please follow these

instructions.

6. Backrest Angle Adjustment :

Caution:

Warning:

SEAT:

Warning:

Seat Slide Adjustment:

Freerider

Seat Height Adjustment:

Freerider

Caution:

Warning:

SEAT:

Backrest Angle Adjustment :

FIG 3

FIG 4

FIG 5

FIG 6

FIG 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Freerider FR510DXs2b Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info