Bedienungsanleitung Freerider FR510DXs2b (Seite 28 von 48) (Englisch)

664127

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Do not remove wheel bolts with the wheel inflated.

Maintain pneumatic tyres at the recommended tyre pressure

found in this manual under 'Technical Specifications'

Failure to observe this warning may result in personal injury.

To remove a rear wheel from your Scooter

for the service of a tyre or tube carry out the following

instructions

1. Using a suitable body stand, lift the side of the vehicle

you wish to service off the ground. Place the stand

under the metal chassis. Care must be taken when lifting

heavy loads, you may need a friend to help you.

Care should also be taken when working on a

stand.

2. by removing the

valve core from the valve with a suitable valve key

( purchased from auto shops ).

Please note the rims of your wheel are a split

two part rim system,

Failure to observe this warning could put you in a

dangerous situation.

3. With the aid of two 13mm spanners (not supplied)

remove the 8mm wheel nuts and bolts from the wheel

rims and centre hub (see fig 35).

4. Side the wheel rims complete with the tyre from the

hub. Pull the two rims apart to expose the tyre and

tube.

5. Replace tyre and tube as necessary. Reassemble

components in reverse order.

Please be safe. Do not lift by the plastic

bodywork.

Freerider

(only competent people should carry out this

procedure).

TYRE SERVICING REAR WHEEL

Warning:

Deflate the air from the wheel assembly

do not dismantle the wheel from

the hub without first letting the air out of the tyre.

TYRE SERVICING REAR WHEEL

Warning:

Please

be safe. Do not lift by the plastic

bodywork.

Freerider

(only

competent people should carry out this

procedure).

FIG 34

the transmission as this will contaminate the original

lubrication and will invalidate your guarantee.

For your own safety, we recommend that you

check the function of your Scooter brakes prior to a journey.

If the motor brake is functioning correctly

and the drive is engaged you will not be able to push your

machine when it is switched off. Or switched on with the

speed control lever in the 'zero speed', central position.

When you drive your Scooter and

you let go of the speed control lever your Scooter

should reduce speed

Take care when lifting the transmission, keep

well away from clothing. It is normal to find a light film

of lubrication around this part.

Safety Note:

If your machine can be pushed as described

above, the motor brake could be faulty. Please do not

use, contact your local Freerider distributor.

Note: Check the Freewheeling Instructions on page 12

of this manual.

Freerider

very quickly. If you notice a change in

the normal slowing/braking condition, and your Scooter

and it does not slow down quickly,

Check the condition of your tyres regularly. Look for signs

of wear, cuts and foreign objects lodged in the tread.

Maintain the tyre pressures at all times; failure to comply

with this can lead to poor performance of your machine and

could make your machine unsafe and/or unstable. Tyres

should be replaced when the tread is worn to 0.5mm.

Your is designed with 'split' wheel rims.

please do not use your

machine, contact your Freerider distributor.

Freerider

Caution:

MOTOR BRAKES

Motor Brake:

DRIVING BRAKE

Warning:

MANUAL EMERGENCY BRAKE

Warning:

Caution:

Warning:

TYRES

The manually operated 'Emergency Brake' is designed to be

operated only in the case of mechanical or electronic failure

to the motor and driving brakes, previously mentioned, See

pages 11& 12 figs 13 & 14 for operating instructions.

On no account operate this brake in conjunction

with the electronic motor brakes. Failure to observe this

instruction may cause damage or premature wear to the

motor and transmission system.

The manual brake system can be adjusted for wear to the

braking material by adjusting the operating cable length

adjustment nut (see fig 34).

Brake adjustment should only be carried out by a

competent engineer, failure to observe this warning could

put the brakes in an unbalanced state and may cause

damage to you or your Scooter.

Caution:

MOTOR

BRAKES

Motor

Brake:

Warning:

DRIVING

BRAKE

Warning:

Take

care when lifting the transmission, keep

well

away from clothing. It is normal to find a light film

lubrication around this part.

Safety

Note:

your machine can be pushed as described

above,

the motor brake could be faulty. Please do not

use,

contact your local Freerider distributor.

Note:

Check the Freewheeling Instructions on page 12

this manual.

Freerider

please do not use your

machine,

contact your Freerider distributor.

MANUAL

EMERGENCY BRAKE

Caution:

Warning:

TYRES

Warning: Freerider

FIG 35

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Freerider FR510DXs2b Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info