Bedienungsanleitung Frico Infraflex (Seite 7 von 10) (Englisch)

787200

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

Infraflex

Installation and operating instructions

With chains

1. Drill holes with a 5 mm diameter bit and x

the wall brackets in the ceiling. Fig.2.

2. Mount the two supports on the aluminum

tube on the back of the unit. Fig.3.

3. Mount the supplied S-hooks on both ends of

the chains and hang the unit. Fig.5.

With hinged arm INFHA05 (accessory)

Hinged arm INFHA05 should not be used in

areas where there is a high risk of earthquakes

or strong winds.

1. Assemble all parts securely with screws and

nuts. Fig.6.

2. Make sure that the cable does not get caught

between the various components.

3. Fix the wall brackets to INFHA05. Fig.7A.

4. Mount the two supports to the aluminum

tube on the back of the unit approx. 25 cm

apart. Fig.3.

5. With the supplied screws, lock the supports in

the right angle on the wall brackets. Fig.7B-C.

On post IHP with bracket INFP (accessories)

1. Fix the wall brackets to INFP. Fig.8A.

2. Open INFP and place around the post IHP.

Fig.8B.

3. Insert the knob and screw until it is

completely locked. Fig.8C.

General Instructions

Read these instructions carefully prior to

installation and use. Keep this manual for

future reference.

The product may only be used as set out in

the assembly and operating instructions. The

guarantee is only valid should the product be used

in the manner intended and in accordance with

the instructions.

Application

Infraex is a versatile patio heater with several

mounting options and is well suited for

temporary heating at events or patios. Infraex

provides immediate heat when turned on and

cools off quickly when switched off.

Protection class: IP55.

Positioning

The heaters must be placed so that they cover

the area to be heated. Optimum comfort is

achieved if the heat is distributed from at

least two directions. Fig.1. A rule of thumb for

infrared heaters is that 600–800 W/m² increases

the experienced temperature by about 10 °C.

The output demand can be reduced if the

area to be heated is protected. If the area

only has a roof, at least 800 W/m² should be

installed. 600 W/m² is sucient if the area has

three walls. For enclosed areas, the output

demand must be calculated. The recommended

installation heights for the heater are shown on

the introduction pages.

Mounting

Infraex can be installed directly on a wall,

with a hinged arm from the wall, with chains

from the ceiling or on a post. Wall brackets and

chains are included in delivery. The heater can

be angled in several xed positions.

For minimum distance, see diagrams on

introductory pages.

Wall mounting

1. Drill holes with a 5 mm diameter bit in the

wall and x the wall brackets. Fig.2.

2. Mount the two supports on the aluminum

tube on the back of the unit. Fig.3.

3. With the supplied screws, lock the supports

in the right angle on the wall brackets. Fig.3.

Fig.4.

Connection

Infraex is equipped with a 1.9 metre cord with

plug for connection to an earthed outlet socket.

The connection cord must not rest against the

unit as the surface becomes hot or can be hit by

thermal radiation. Contact an electrician if the

cord needs to be changed. Note that due to the

high temperatures in the heater, a cord of the

type H05RN-F or the like should be used.

As the halogen lamp has a high starting

current the wall socket should be fuse

protected by a slow burn fuse.

In the event of uncertainty contact an

electrician.

Control

The heater is controlled with the included

remote control (on/stand-by), or the built-in

push button. The remote control can activate

several heaters.

• Use included 2 x LR1 batteries for the remote

control. Remove batteries when not in use

for an extended period in order to preserve

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Frico Infraflex Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Frico Infraflex

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info