Bedienungsanleitung Frigidaire FGET2765KF (Seite 12 von 32) (Englisch)

526988

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

SETTING OVEN CONTROLS

SETTING CONTINUOUS BAKE OR 6 HOUR

ENERGY SAVING

The TIMER and SELF CLEAN pads control the Continuous

Bake or 6 Hour Energy Saving features. The oven control has

a factory preset built-in 6 Hour Energy Saving feature that

will shut off the oven if the oven control is left on for more

than 6 hours. The oven can be programmed to override this

feature for Continuous Baking.

To set the control for Continuous Bake or 6 Hour

Energy Saving features

1. Press and hold TIMER for 6 seconds.

After 6 seconds “6Hr OFF” or “StAY On” will appear

in the display and the control will beep once.

2. Press SELF CLEAN to switch between the 6 Hour Energy

Saving and continuous bake features.

Note: “6Hr OFF” in the display indicates the control is set for

the 6 Hour Energy Saving mode and “StAY On” indicates

the control is set for the Continuous Bake feature.

3. Press START to accept the change (display will return to

time of day) or press CANCEL to reject the change.

SETTING TEMPERATURE DISPLAY —

FAHRENHEIT OR CELSIUS:

The BROIL and SELF CLEAN pads control the

Fahrenheit or Celsius temperature display modes. The

oven control can be programmed to display temperatures

in Fahrenheit or Celsius. The oven has been preset at the

factory to display in Fahrenheit.

To change display from Fahrenheit to Celsius or

Celsius to Fahrenheit

1. To tell if the display is set for Fahrenheit or Celsius

press BROIL and hold it for 6 seconds; “550°”

will appear and “BROIL” will ﬂ ash in the display

and a beep will sound. If “FAhrnht” appears, the

display is set to show temperatures in Fahrenheit.

If “CELSIUS” appears, the display is set to show

temperatures in Celsius.

2. Press SELF CLEAN to switch between Fahrenheit or

Celsius display modes. The display will show either

“FAhrnht” or “CELSIUS”.

3. Press START to accept the change or press CANCEL

to reject the change.

SETTING THE CLOCK

The SET CLOCK pad is used to set the clock. The clock may

be set for 12 or 24 hour time of day operation. The clock

has been preset at the factory for the 12 hour operation.

When the range is ﬁ rst plugged in, or when the power

supply to the range has been interrupted, the timer in the

display will ﬂ ash.

To set the clock (example below for 1:30)

1. Press SET CLOCK. “CLO” will appear in the display.

2. Press 1 3 0 pads to set the time of day to 1:30. “CLO”

will stay in the display.

3. Press START. “CLO” will disappear and the clock will

start.

CHANGING BETWEEN 12 OR 24 HOUR TIME

OF DAY DISPLAY

1. Press and hold SET CLOCK for 6 seconds. “CLO” will

appear in the display.

2. CONTINUE holding the pad until “12Hr dAY” or “24Hr

dAY” appears in the display and the control beeps

once.

3. Press SELF CLEAN to switch between the 12 and 24

hour time of day display. The display will show either

“12Hr dAY” or “24Hr dAY”.

4. Press START to accept the change or press CANCEL to

reject the change.

5. Reset the correct time as described in To set the Clock

above. Please note that if the 24 hour time of day mode

was chosen, the clock will now display time from 0:00

through 23:59 hours.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Frigidaire FGET2765KF Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Frigidaire FGET2765KF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info