Bedienungsanleitung Frigidaire FGEW2765PF (Seite 22 von 31) (Englisch)

590570

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

OVEN CONTROLS

Restoring Factory Default Setting

Your appliance is programmed with default control settings.

Over time, users may make changes to these settings. The

following options have settings that can be modified and

may have been changed since the appliance was new:

•12 or 24 hour display mode

•Continuous bake or 12 hour energy savings mode

•Silent or audible control

•Oven temperature display (°F or °C)

•Oven temperature adjustments (offsets)

•Stored recipes

•Cancel/continue cooking with meat probe option.

To restore oven control to factory default settings:

1. When the oven is in idle and no cooking function is in

operation, press and hold the 7 key until the acceptance

tone sounds (about 6 seconds)

2. Press start. The control is now reset to default settings.

Adjusting Oven Temperature

The temperature in the oven is pre-set at the factory. When

first using the oven, be sure to follow recipe times and

temperatures. If you think the oven is cooking too hot or too

cool for the temperature you select, you can adjust the

actual oven temperature to be more or less than what is

displayed. Before adjusting, test a recipe by using a

temperature setting higher or lower than the recommended

temperature. The baking results should help you to decide

how much of an adjustment is needed.

To adjust the oven temperature higher:

1. Press bake for 6 seconds. UPO 0 will appear in the

display.

2. To increase the temperature, use the number keys to

enter the desired change. For example, for 30°F, press

3 0. The temperature may be increased as much as

35°F (19°C).

3. Press start to accept the temperature change and the

display will return to the time of day. Press off to reject

the change if necessary.

To adjust the oven temperature lower:

1. Press bake for 6 seconds. UPO 0 will appear in the

display.

2. To decrease the temperature, use the number keys to

enter the desired change (Example -30°F) 3 0. Then,

press self clean. The temperature may be decreased

as much as 35°F (19°C).

3. Press start to accept the temperature change and the

display will return to the time of day. Press off to reject

the change if necessary.

If you choose to restore factory default settings, all of the

above user preferences will be restored to their original

settings (factory default). The oven temperature offset will

reset, and any stored recipes will be cleared.

NOTE

The oven temperature adjustments made with this feature

will not change the self clean cycle temperature or the

broil temperature.

The oven temperature adjustments are permanent and

will stay in the unit memory unless you manually change

it again or if all the controls are reset. Even a power

outage will not reset these changes. Follow the same

procedure again if you wish to change it to a different

setting or use the “Restoring Factory Default Setting”

instructions on this page to restore settings to their

defaults.

NOTE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Frigidaire FGEW2765PF Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Frigidaire FGEW2765PF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info