Bedienungsanleitung Fritel co 1190 (Seite 13 von 20) (Deutsch, Englisch, Holländisch, Französisch)

463948

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

BEFORE THE FIRST USE

- Check if the mains voltage of your appliance (230 Volt) corresponds with the mains voltage in your

home.

- Remove all packaging. Then clean the parts as described in ‘ Maintenance and cleaning’, before using

the appliance for the first time.

- Check the coffee maker on possible defects.

- Fill the water tank with water (see MAX water level on coffee jar) and let it run through. Repeat this a

few times.

USING THE COFFEE MAKER

- Fill the coffee jar with the desired quantity of water (NEVER exceed the MAX. water level). Open the

lid, pour in the water and close the lid.

- Open the filter holder. You can either use the nylon filter or use a paper filter (size 1x4)

- Add the desired quantity of coffee and close the filter holder.

- Place the coffee jar on the keep warm plate.

- Plug in the coffee maker. The LCD display now shows „12:00“ and „:“ will blink.

- Press the ON/AUTO/OFF button. The control lamp is now red. The coffee maker starts working.

- The coffee making process can be interrupted by pressing ON/AUTO/OFF twice. The control lamp is

now blue. After about 10 sec. the control lamp goes out.

- To restart the coffee maker, press ON/AUTO/OFF once. The control lamp is now red.

Tip: you can remove the coffee jar for pouring coffee at any time. Thanks to the anti drip function, the

coffee will stop dripping during about 30 seconds. After that, the coffee will continue running.

- After the coffee is ready and if you leave the coffee jar on the keep warm plate, the coffee will be kept

warm. After two hours, the coffee maker will switch off automatically if this is not done manually in the

meantime. For the best coffee aroma, it is recommended to drink the coffee right after it is made.

- Attention: fresh made coffee is very hot. Be careful not to get burned when pouring the coffee.

- If you are not using the coffee maker, switch it off and plug it out.

TIMER FUNCTION

If you wish to use the timer function, you can program your coffee maker as follows. i.e. it is now 17.10

and you wish the coffee maker to start at 20.15.

1) Press PROG. once. The LCD display shows „CLOCK“ in the top right corner.

2) Press HOUR and MIN until you have set the actual time (fig.1)

3) Press PROG. once. The LCD display shows „TIMER“ in the top left corner.

4) Press HOUR and MIN until you have set the desired start time (fig.2)

5) Press PROG. again until the words „CLOCK“ and „TIMER“ do not show on

the display anymore. The blue control lamp of the PROG. button will blink.

6) Press ON/AUTO/OFF twice. The blue control lamp will blink. On the LCD

display you will see the actual time. By pressing PROG. you will see the

delayed start time.

REMARK:

- Press ON/AUTO/OFF once to cancel the delayed start time.

- Press ON/AUTO/OFF twice to start the coffee making process right

away

- If you wish to modify the delayed start time, repeat steps 1-5

When the delayed start time is reached, the blue control lamp of the ON/AUTO/OFF button will not blink

anymore, but will turn red. The coffee maker now starts making coffee.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fritel co 1190 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info