Bedienungsanleitung Fritel Frytastic-5571 (Seite 26 von 40) (Deutsch, Englisch, Holländisch, Französisch)

647322

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

3.1.2. Use of solid fat

With this program the frying fat is melted as per special electronic procedure,

determined in advance, in a safe and controlled way.

1. Remove the lid and the basket.

2. Cut the fat in small pieces and spread over the complete heating element (fig.F).

3. Completely unroll the power cord and insert the plug into the socket.

4. Push the thermostat knob for 2 sec. (fig. A). On the display the text « Turbo SF

System Activated » and a sound signal will be heard.

5. On the display following text will flash « Melting Solid Fat » (14).

6. Push the thermostat knob to confirm (fig. C). The red lamp (fig.D) lights up and

the fat will start melting.

Caution: if you do NOT push the thermostat knob within the 15 sec. the display

will return to the previous setting. (In this case: Turbo SF System Activated)

7. When the fat is completely melted, the red lamp turns green and a sound signal

will be heard (fig.E).

8. Then follow the instruction of 3.2 as from point 4.

3.2. Second and next use

1. Completely unroll the power cord and insert the plug in the socket.

2. Push the thermostat knob during 2 sec. (fig. A). The display will show « Turbo

SF System Activated » and a sound signal will be heard.

3. On the display the text « Melting Solid Fat » flashes

4. Turn the thermostat knob to the desired temperature (fig. B).

Caution: if you use frying fat: FIRST follow instructions hereafter, before you

turn the thermostat knob to the desired temperature:

 Make some holes till the heating element with a wooden spoon in the fat (fig.

G).

 Push the thermostat knob to confirm (fig. C). The red lamp lights up (fig. D)

and the fat will start to melt. When the fat has melted, the lamp turns green and

a sound signal will be heard (fig. E)

5. Push the thermostat knob to confirm (fig.C). The red lamp (fig.D) will light up

and stays red during warming up.

Caution: if you do NOT push the thermostat knob within the 15 sec. the display

will return to the previous setting.

6. The oil/fat is at temperature. The red lamp turns green and a sound signal will

be heard. (fig.E).

Remark: you can always change the temperature while frying:

 Turn the thermostat knob to the desired temperature.

 The desired temperature flashes.

 Push the thermostat knob to confirm (fig.C). The red lamp lights up (fig.D). If

you if you do NOT push the thermostat knob within the 15 sec. the display will

return to the previous setting.

 The oil/fat has reached the desired temperature. The red lamp turns green if

you chose a higher temperature or the green light stays green of you chose a

lower temperature. A sound signal will be heard (fig. E)

7. Fill the basket to max 2/3 with food to fry which has been dried off before. For a

optimal result we recommend following quantities:

 Frozen fries: fill the basket to max 2/3.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fritel Frytastic-5571 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info